What's everyone using for backup light switch?
well in my car (69) i connected the plug on the passanger front side of the t56 ??? IS THAT WHAT YOU HAVE ? LOL if not nevermind haha ....but if you do then i connected them to the pink and green wire i had on my center console ...done!
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo Here is a link for the backup light plug. It plugs into the only place possible on the passenger side of the tranny.
http://198.208.187.182/internet/Part...cpartnbr=PT107
http://198.208.187.182/internet/Part...cpartnbr=PT107
Also it doesn't matter which side is power and which is ground. Its just a switch that shuts when the trans is in reverse. I used the factory wires from my car and connected them to the switch.
If you are not using the factory wiring, then just run 12V to the reverse lights then run the ground from the lights to the trans switch then ground the other side of the switch.
If you are not using the factory wiring, then just run 12V to the reverse lights then run the ground from the lights to the trans switch then ground the other side of the switch.
Joined: Sep 2004
Posts: 3,148
Likes: 12
From: Downers Grove, IL
Originally Posted by leonpiper69
what about us automatic guys???? im useing a b&m pro stick. i assume they make something for the shifter for a reverse light , no?
Originally Posted by leonpiper69
what about us automatic guys???? im useing a b&m pro stick. i assume they make something for the shifter for a reverse light , no?
http://store.summitracing.com/partde...5&autoview=sku
For B&M shifters you can use this reverse / neutral safety switch, if you need it for both you will need two switches.
BMM-80629 - $12.95 @ Summit Racing
Marc
For B&M shifters you can use this reverse / neutral safety switch, if you need it for both you will need two switches.
BMM-80629 - $12.95 @ Summit Racing
Marc
On The Tree
Joined: Nov 2004
Posts: 127
Likes: 0
From: childress tx
b&m switch All that is is a simple limit switch that you can rob off of an old dryer (it stops the dryer when the door opens) or other electric apliance or purchase at any decent electrical supply store. There are different types normally open and normally closed you can make a reverse light circut work with either. but it would be simple to just put a normally closed one in the groud side of the circut