chevy motor in mustang frame
Thread Starter
Teching In
Joined: Dec 2006
Posts: 5
Likes: 0
From: Worcester,MA
chevy motor in mustang frame Friends of mine and myself are working on a "creation" We were woundering if anyone else has done a chevy motor in a mustang hatchback(79-93) body. SOmething different. What have you done to make it run transmission wise. We have a TREMEC TKO 600 going in it. Thanks
This conversion (either SBC or LS1) has been done MANY MANY times 
Check out my conversion here: http://www.ls1mustang.com
Check out my conversion here: http://www.ls1mustang.com
Are you kidding me? An SBC swap in a Mustang is the most common thing ever, I have seen ALOT at the track and two on the street around here. LS1 swap is another story though.
Thread Starter
Teching In
Joined: Dec 2006
Posts: 5
Likes: 0
From: Worcester,MA
WOW. Didn't realize it was a common swap. Not for central Mass I guess. LOL. THank guys!
On that note though. My work/ Fortes Part Connection(www.fortesparts.com) better to call
We have the connections to hook up the linkage for the TKO's. Just for your info/
On that note though. My work/ Fortes Part Connection(www.fortesparts.com) better to call
We have the connections to hook up the linkage for the TKO's. Just for your info/
Launching!
Joined: Aug 2004
Posts: 222
Likes: 0
From: Huntsville, AL
So in the first post you're asking what we're doing for a transmission, but in the last post you're saying that your employer Forte's has all the transmission answers.
Did this thread just turn into a commercial?
Did this thread just turn into a commercial?
Trending Topics
Thread Starter
Teching In
Joined: Dec 2006
Posts: 5
Likes: 0
From: Worcester,MA
Well, I am asking what other people have done. I am running an automatic because its gonna be racing only.
I didn't word it correctly though. Thanks for the tip:
For people who want the t-56 in their "chevy stang" We have the parts needed to set it up.
I didn't word it correctly though. Thanks for the tip:
For people who want the t-56 in their "chevy stang" We have the parts needed to set it up.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
As long as we're on the topic, my nephew picked up a 88 Mustang roller, and I want to start collecting parts with him. I want to push him to go Ls1 but he has a greasy old small block chev stash in the barn. What did you use for headers with LSx as well as SBC engine? Thanks, MV
http://www.enzoco.com/mike/truck/p2page8.htm
http://www.enzoco.com/mike/truck/p2page8.htm
Originally Posted by SKEETER_SVT01
Friends of mine and myself are working on a "creation" We were woundering if anyone else has done a chevy motor in a mustang hatchback(79-93) body. SOmething different. What have you done to make it run transmission wise. We have a TREMEC TKO 600 going in it. Thanks
Originally Posted by SKEETER_SVT01
Well, I am asking what other people have done. I am running an automatic because its gonna be racing only.