anyone use wait4me for harness work
#1
TECH Enthusiast
Thread Starter
iTrader: (1)
Join Date: Aug 2004
Posts: 560
Likes: 0
Received 0 Likes
on
0 Posts
anyone use wait4me for harness work
Im getting the harness/pullout from an 03 chevy truck 4.8L. I dont have time to go ahead and start modding the harness myself. Ive heard that wait4me does harness cleanup and retunes for $300 which I can live with. Just looking for any experience with this.
I am simply using this engine to go onto a dyno test stand.
I am simply using this engine to go onto a dyno test stand.
#3
sawzall wielding director
iTrader: (4)
I did my own harness, but Jesse did the tuning on my computer and I am very happy with the tune. His rates are very reasonable plus he was able to set me up with a tow/haul mode, and he reset my tach output and speedo output (the output from the computer to the instrument cluster that way I could use that signal to control my ancient cruise control which was looking for 2000ppm not the current 4000ppm standard)
#7
On The Tree
Join Date: Sep 2003
Location: Gainesville, Tx
Posts: 197
Likes: 0
Received 0 Likes
on
0 Posts
PCM and HARNESS
I need an engine wiring harness. All I need is the stuff for the injectors, power, knock sensors, crank position sensor. I'm building a twin turbo LS1 for my 77 trans am drag car. what else would i need for the engine harness?