Moroso oil pan?
TECH Resident
Joined: Oct 2004
Posts: 800
Likes: 1
From: Simi VAlley,CA
Milodon has some nice oil pans for LS motors now.......in fact, I supplied them with and engine for R & D on their pans and they promised me a freebie............I best call over there and find out where my pan is.....and my extra engine.
Lance is right, after you add on the filter and oil pickup the cost goes up quite a bit. The best overall deal i have found out there is from autokraft
http://www.autokraft.org/products/
http://www.autokraft.org/products/
Will the swap oil pan thread die like last time?? I need owner info on the autokraft! I agree with the other guys about the Morosso, the pan price looks good at $220, but the pick up is $80 and then the remote oil filter setup. The autokraft is $430 but I think is a better setup.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Originally Posted by SleeperSS
If there are 3 people that need an autokraft pan we can get it for $409 shipped. Let me know if any of you are interested. Thanks
Originally Posted by SleeperSS
If there are 3 people that need an autokraft pan we can get it for $409 shipped. Let me know if any of you are interested. Thanks
9 Second Club
Joined: Nov 2003
Posts: 13,616
Likes: 185
From: Norn Iron
I would be interested in the Autokraft one..but need more info.
Id like pics of the oil filter location... and some pan measurements. I cant go any deeper than the stock 5.5" or so.
And depth at the front is quite important, as my steering rack sits there, and no doubt this pan will need cut.
And what is it made from ? Steel or Alu ?
Id like pics of the oil filter location... and some pan measurements. I cant go any deeper than the stock 5.5" or so.
And depth at the front is quite important, as my steering rack sits there, and no doubt this pan will need cut.
And what is it made from ? Steel or Alu ?
I have the autokraft on my LS1-S10 Blazer swap and its really a nice piece. It comes with the pickup, and the billet oil filter adapter to keep the filter in the stock location. here are some pictures.
Teching In
Joined: Jul 2006
Posts: 29
Likes: 0
From: Waterford, MI
I have the autokraft. Good piece. It clears the unisteer r&p by about 1.5" and clears the frame rail in a first gen f body. If you plan on doing any corner carving it's a must over the moroso as it has trap doors for cornering instead of motorized bowling.
