Doug's Headers for A-body Chevelle LSx Conversion
Thread Starter
Staging Lane
Joined: Apr 2007
Posts: 66
Likes: 0
From: Las Vegas, NV
Doug's Headers for A-body Chevelle LSx Conversion Saw these while I was at SEMA... not sure the difference between these and Hookers... Wish I had taken a picture of them.. well they had one side hanging as a display.... I found them on the JEGs site but no actual pic ...
http://www.jegs.com/webapp/wcs/store...0002_889174_-1
Not sure about fit but the headers looked nice. They also offer (and recomend) thier install adapters to facilitate correct fitment... The adapters look like they were cut out of flat stock plate steel. Nothing special... Just another option to look into... I will go through the numerous catalogs that I gathered for anything that might be related to conversions....
http://www.jegs.com/webapp/wcs/store...0002_889174_-1
Not sure about fit but the headers looked nice. They also offer (and recomend) thier install adapters to facilitate correct fitment... The adapters look like they were cut out of flat stock plate steel. Nothing special... Just another option to look into... I will go through the numerous catalogs that I gathered for anything that might be related to conversions....
Has anyone seen there adapter kit.. are they made like S&P, BRP, ATS or Hookers ???
Would like to put some headers on this winter and looking at options.. at lease there is now Doug's and Hookers.. maybe the prices will start dropping some now that there are other manufactors producing swap headers..
Would like to put some headers on this winter and looking at options.. at lease there is now Doug's and Hookers.. maybe the prices will start dropping some now that there are other manufactors producing swap headers..
it looks like their a little cheaper than hookers, i think i ended up paying a little over $600 for the hookers and frame adapters, but the fit was great, real tight tuck under the body, and the caddy cts oil pan fit.
i was going to have a buddy with a cnc maching dup the hooker mount adapter, but prob wont bother-the only thing i am going to do to the headers is weld a 3 hole flange on them, dont like the slip fit
i have heard some hookers were coming w/o sensor fittings, but mine had them
i was going to have a buddy with a cnc maching dup the hooker mount adapter, but prob wont bother-the only thing i am going to do to the headers is weld a 3 hole flange on them, dont like the slip fit
i have heard some hookers were coming w/o sensor fittings, but mine had them
I just scored a set of 1 7/8" SC's for $200 shipped to me from this forum. They have one small hole in the collector area, but that's easily fixed...
Of course, old "Classic" did go onto my wanted thread and try to cut my throat on the deal, but fortunately, he is cheaper than even I am and ended up insulting the guy with his offer...
Anyway, once I get them, I'll let you all know how they fit with the ATS stuff.
Of course, old "Classic" did go onto my wanted thread and try to cut my throat on the deal, but fortunately, he is cheaper than even I am and ended up insulting the guy with his offer...
Anyway, once I get them, I'll let you all know how they fit with the ATS stuff.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
On The Tree
Joined: Jun 2007
Posts: 146
Likes: 0
From: albuquerque, north mexico
I just scored a set of 1 7/8" SC's for $200 shipped to me from this forum. They have one small hole in the collector area, but that's easily fixed...
Of course, old "Classic" did go onto my wanted thread and try to cut my throat on the deal, but fortunately, he is cheaper than even I am and ended up insulting the guy with his offer...
Anyway, once I get them, I'll let you all know how they fit with the ATS stuff.
Of course, old "Classic" did go onto my wanted thread and try to cut my throat on the deal, but fortunately, he is cheaper than even I am and ended up insulting the guy with his offer...
Anyway, once I get them, I'll let you all know how they fit with the ATS stuff.
Moron, that was BEFORE that guy posted. There was a VENDOR that posted a link to his WEBSITE with brand new headers for sale.....
And I didn't tell "everyone" top go there. I told one guy.
Blome.
And I didn't tell "everyone" top go there. I told one guy.
Blome.
