Yup, another Mustang with an LS2, drag car.
#182
TECH Apprentice
Thread Starter
Join Date: Oct 2007
Location: Granada Hills, Ca
Posts: 385
Likes: 0
Received 0 Likes
on
0 Posts
That's the plan.....
http://youtu.be/qPSkwBJAhiQ
Hopefully I can get out of work early enough to make it there and be able to make more than one pass. Still need to finalize some **** on the car, but it is 99.9% ready
http://youtu.be/qPSkwBJAhiQ
Hopefully I can get out of work early enough to make it there and be able to make more than one pass. Still need to finalize some **** on the car, but it is 99.9% ready
#183
10 Second Club
iTrader: (44)
Join Date: May 2004
Location: Phoenix, AZ
Posts: 1,658
Likes: 0
Received 0 Likes
on
0 Posts
That's the plan.....
http://youtu.be/qPSkwBJAhiQ
Hopefully I can get out of work early enough to make it there and be able to make more than one pass. Still need to finalize some **** on the car, but it is 99.9% ready
http://youtu.be/qPSkwBJAhiQ
Hopefully I can get out of work early enough to make it there and be able to make more than one pass. Still need to finalize some **** on the car, but it is 99.9% ready
#184
TECH Apprentice
Thread Starter
Join Date: Oct 2007
Location: Granada Hills, Ca
Posts: 385
Likes: 0
Received 0 Likes
on
0 Posts
Definitely will... I am so excited to finally make some hits. I don't expect much. If this thing goes 6.90, I will be happy. The clutch is going to be the biggest hurdle
#189
TECH Apprentice
Thread Starter
Join Date: Oct 2007
Location: Granada Hills, Ca
Posts: 385
Likes: 0
Received 0 Likes
on
0 Posts
#190
TECH Apprentice
Thread Starter
Join Date: Oct 2007
Location: Granada Hills, Ca
Posts: 385
Likes: 0
Received 0 Likes
on
0 Posts
the build wasnt that bad because it has been spread over several years. I probably have about $15-20k in the roller with the transmission. Not sure on the engine.
this was built primarily with used parts.
#192
TECH Apprentice
Thread Starter
Join Date: Oct 2007
Location: Granada Hills, Ca
Posts: 385
Likes: 0
Received 0 Likes
on
0 Posts
#194
TECH Apprentice
Thread Starter
Join Date: Oct 2007
Location: Granada Hills, Ca
Posts: 385
Likes: 0
Received 0 Likes
on
0 Posts
I will be at Irwindale tonight. Not going to have the LS engine in it, though. we put a conventional 23degree sbc in it, for now. got sick of waiting for the LS engine to get done, so we slapped together some shitbox engine with used parts to get the car and clutch dialed in.
#196
TECH Apprentice
Thread Starter
Join Date: Oct 2007
Location: Granada Hills, Ca
Posts: 385
Likes: 0
Received 0 Likes
on
0 Posts
Yeah, it was in the car and was having vacuum issues and we pulled it apart and found some piston problems. got new pistons and will be putting it back together. in the meantime, i still have the 23*sbc in it and have run 5.9@116 on a 200 shot.
#198
On The Tree
Join Date: Sep 2010
Location: Chattanooga
Posts: 110
Likes: 0
Received 0 Likes
on
0 Posts
have u painted it? if not u going back silver? love the silver with the black moldings. I am leaving my maroon hb moldings black when i repaint it. I think it seperates the lines well.. Great build. Im just starting back on mine....doing a stock btm end ls1 with a tremec behind it.....ur moto is my moto...real race cars have 3 pedals. good luck with urs.
#200
TECH Apprentice
Thread Starter
Join Date: Oct 2007
Location: Granada Hills, Ca
Posts: 385
Likes: 0
Received 0 Likes
on
0 Posts
Here is one of my license passes. The car wasnt hooking, so I decided to leave pretty low to bog it and once it had some wheel speed, i hit the unit and it spun into third gear and I ran out of gear and shut it down at 1000ft. ran 9.81@144 with a 1.78 60ft and 6.40@120 in the 1/8.
https://www.youtube.com/watch?v=2bkr...e_gdata_player
https://www.youtube.com/watch?v=2bkr...e_gdata_player