Conversions & Swaps LSX Engines in Non-LSX Vehicles
Sponsored by:
Sponsored by:

Removing T56 for service???

Thread Tools
 
Search this Thread
 
Old 03-11-2008 | 11:08 AM
  #21  
Rodder's Avatar
TECH Resident
iTrader: (2)
 
Joined: Jun 2006
Posts: 802
Likes: 0
From: Roswell, GA
Default

67: Wheel Vintiques makes 17" Rallyes

Shawn: Looking at the frame mounts, I think your engine is in exactly the same place as mine. Looks like more clearance in your picture, but I've never seen mine without the intake/coilpacks/wiring/etc. Your trans might be lower than mine though--can't judge by the pic.
Old 03-11-2008 | 02:05 PM
  #22  
Shawn MacAnanny's Avatar
TECH Addict
iTrader: (12)
 
Joined: Jul 2004
Posts: 2,105
Likes: 3
From: Delaware
Default

Oh! That makes more sense to get to those bolts from underneath haha. Sorry for the hi-jack when i was reading it, it just sounded like i may have made my transmission crossmember to high. I jacked the trans all the way up until it hit the tunnel then let it down about 3/8"

If you lived closer i'd say you could have my 15" rallies. You can run 275/60-15 from what i have read. 28" tall tires. I'm going to try to run 295/65r15s which are about 30" tall but i might have to cut and bang some things. I suggest the Micket Thompson ET Street Radials if you're looking for amazing sticky tires that are treaded for the rain. Those are what i'll be running and mines gonna be a DD.

http://thunderracing.com/catalog/?ac...ories&pcid=216



Quick Reply: Removing T56 for service???



All times are GMT -5. The time now is 01:01 AM.