My conversion pics(2nd try)
Thread Starter
Staging Lane
Joined: Jan 2003
Posts: 70
Likes: 0
From: Grand Rapids,Mi
My conversion pics(2nd try) These should work this time. Let me know if they don't.
Just click on the link then click on pictures.
http://groups.msn.com/My68Camaroproject
Just click on the link then click on pictures.
http://groups.msn.com/My68Camaroproject
Staging Lane
Joined: Jan 2003
Posts: 57
Likes: 0
From: NJ
Re: My conversion pics(2nd try) Looks realy nice John. You have nice ride. I wish mine is as nice as yours.
Would yopu give me some info on your hydraulik lines and fitting sizes? What is the adapter size on the power steering pump? what kind of hose did you use?
Thanks
Would yopu give me some info on your hydraulik lines and fitting sizes? What is the adapter size on the power steering pump? what kind of hose did you use?
Thanks
Thread Starter
Staging Lane
Joined: Jan 2003
Posts: 70
Likes: 0
From: Grand Rapids,Mi
Re: My conversion pics(2nd try) Thanks a lot guys. It has been quite the project but well worth it.
For my power steering I used Russell powerflex hose on the pressure side(part #632600). The adaptor for the pump is a 06 x 16mm(648060). The steering box adapters are 06 to 11/16(648050) and 06 to 5/8(640380). And 2 90 degree fittings from the hose to the adaptor(620421). For the other hose I used a standard Aeroquip 06 hose(FCA 0603) and a 90 degree fitting(FCE 4032). It cost me about $100 for all of that. Anything else just let me know. John
For my power steering I used Russell powerflex hose on the pressure side(part #632600). The adaptor for the pump is a 06 x 16mm(648060). The steering box adapters are 06 to 11/16(648050) and 06 to 5/8(640380). And 2 90 degree fittings from the hose to the adaptor(620421). For the other hose I used a standard Aeroquip 06 hose(FCA 0603) and a 90 degree fitting(FCE 4032). It cost me about $100 for all of that. Anything else just let me know. John
Joined: Nov 2001
Posts: 1,707
Likes: 33
From: Anderson, Indiana
Re: My conversion pics(2nd try) Nice, nice car! 
That's a great looking gauge package too! I like the in dash ones, as well as the neat console gauge setup.
Good job!
That's a great looking gauge package too! I like the in dash ones, as well as the neat console gauge setup.
Good job!
__________________
91 Z28 LS2 408CI, LS9 Supercharger, LPE GT7 cam, Yank3000, 3450 raceweight.
Latest numbers: 9.71 ET, 141.42 MPH, 1.40 60' , 610 RWHP Mustang Dyno
www.speartech.com
91 Z28 LS2 408CI, LS9 Supercharger, LPE GT7 cam, Yank3000, 3450 raceweight.
Latest numbers: 9.71 ET, 141.42 MPH, 1.40 60' , 610 RWHP Mustang Dyno
www.speartech.com
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Thread Starter
Staging Lane
Joined: Jan 2003
Posts: 70
Likes: 0
From: Grand Rapids,Mi
Re: My conversion pics(2nd try) Headers and mounts are from S&P.
I just want to say thanks to all of you. I learned a lot from this site. I could not have done this without you.
And a big thanks to Speartech. He was a huge help.
John
I just want to say thanks to all of you. I learned a lot from this site. I could not have done this without you.
And a big thanks to Speartech. He was a huge help.
John