Speedo Hookup
In general it is best to hook it up directly to the speedo output on the trans. It will give a sinewave. You will also need a pullup resistor of if the speedo has such a function built-in you have to use that.
The signal from the PCM can also beused if the Speedo can handle a square wave signal. Some can and some can't.
The PCM also need VSS input for different task, especially if you run an auto.
Jan
Trending Topics
The Best V8 Stories One Small Block at Time
Since it sounds like the cruise setup is a few years old I would guess that it is looking for a square wave DC signal since that was used before the newer sine wave VSS`s came out.






