spark plug wire question
Thread Starter
TECH Enthusiast
Joined: Apr 2006
Posts: 630
Likes: 1
From: New York City
spark plug wire question ive noticed that my stock wires won't clear my s&p headers in a few spots .does anyone know if i have any options than the stock wires,or has anyone ran into this problem,maybe im overlooking something. I'll call s&p tomorrow and see what they say. thanks JOHN
i like the regular 8.5 msd wires, you can just bend em. i did a set for a friend on his ls1 (stock) and you just give em a bend to whatever angle you want. also the graneteeli wires have 90's i think as well as the stock vette wires.
I need to try that on my msds. I didnt know you could bend them
Could someone post some part numbers?
I'm having the same problem with my LS1 conversion and Hooker A body swap headders. I've head the MSD "bendable" will work but not sure if these are the generic "LS1" wires on their site...
I'll call MSD - I'll post if I learn anything....
I'm having the same problem with my LS1 conversion and Hooker A body swap headders. I've head the MSD "bendable" will work but not sure if these are the generic "LS1" wires on their site...
I'll call MSD - I'll post if I learn anything....
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Yeah, we used the magnacore, they are not my favorite choice, but they work well. They don't give you that good snap feel when installing, so you are always second guessing yourself. Other than that though, they work and clear well.
I bought these MSD 32829 wires with the multi angle plugs when the stockers hit my headers. These have enough bend they should clear anything.
http://www.jegs.com/i/MSD/121/32829/10002/-1
http://www.jegs.com/i/MSD/121/32829/10002/-1
I couldnt decide what I wanted to do with my wires. Since I had (I think) taylor 10mm wires on the car, I wanted to keep them. I picked up a set of accel spark plug wire boot sleeves at autozone. The spark plug boots actually lay up against the primary tubes in a few spots, and the sleeves dont burn, or allow the boot to melt at all. I was pretty impressed.
I even grabbed another set to insulate my clutch hyd. line since its really close to the headers in a spot. Just another option if you dont wanna buy wires.
J.
I even grabbed another set to insulate my clutch hyd. line since its really close to the headers in a spot. Just another option if you dont wanna buy wires.
J.
