GP On A-Body Swap Headers - Edelbrocks!!!
#41
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Tom
#42
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
We now include the collector extention with flanges. To those that purchased headers and would like the flanges and extentions call the tech line @ 800-416-8628 between 8am to 5 pm PST.
As to the O2 sensor bungs, we made a call if we should weld in the bungs. We were concerned as to where they would need to be welded in or if they should be welded in at all (carb applications).
#43
On The Tree
Thread Starter
iTrader: (3)
Join Date: Dec 2007
Location: Huntington Beach, Ca
Posts: 138
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
All PM's have been sent out. as soon as i get all the addresses, get quotes and collect the money, theyll be ready to ship. im a firefighter so im gone 24hrs at a time (48-72 if i have a backfill) so if i dont get back to you right away thats most likely the reason.
right now the list of 10 is as follows; bczee, flywheel, subtlez28, 72chevy72, wingman, samdogmx, touronhold72, 70 chevelle, crzyfast and myself
btw, its good to see that edelbrock is standing behind their product.
Tim
right now the list of 10 is as follows; bczee, flywheel, subtlez28, 72chevy72, wingman, samdogmx, touronhold72, 70 chevelle, crzyfast and myself
btw, its good to see that edelbrock is standing behind their product.
Tim
#44
On The Tree
Thread Starter
iTrader: (3)
Join Date: Dec 2007
Location: Huntington Beach, Ca
Posts: 138
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
it looks like all the headers are in stock and will be picked up this week. if all goes as planned they should be shipping by the beginning of next week.
thanks, Tim
thanks, Tim
#46
On The Tree
Thread Starter
iTrader: (3)
Join Date: Dec 2007
Location: Huntington Beach, Ca
Posts: 138
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
well we're down to 9 and looking for one more. this shouldnt slow things up. im still waiting for three more people to reply to the pms and then we'll get moving.
#47
On The Tree
Thread Starter
iTrader: (3)
Join Date: Dec 2007
Location: Huntington Beach, Ca
Posts: 138
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
im now in possession of all 10. pms have been sent out and shipping will start on friday for those who have paid. we still havent filled the 10th spot so im looking for one more. id be willing to hold it until next month if somebody wants it and just cant come up with the money right now.
the gp will be on whether we have 10 or not.
Tim
the gp will be on whether we have 10 or not.
Tim
#49
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
We now include the collector extention with flanges. To those that purchased headers and would like the flanges and extentions call the tech line @ 800-416-8628 between 8am to 5 pm PST.
As to the O2 sensor bungs, we made a call if we should weld in the bungs. We were concerned as to where they would need to be welded in or if they should be welded in at all (carb applications).
As to the O2 sensor bungs, we made a call if we should weld in the bungs. We were concerned as to where they would need to be welded in or if they should be welded in at all (carb applications).
Are the flanges free or do I have to pay for them? I bought them through summit but in my opinion since I already paid full price they should be free!?
Thanks for your input.
#51
On The Tree
Thread Starter
iTrader: (3)
Join Date: Dec 2007
Location: Huntington Beach, Ca
Posts: 138
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
the headers will go out tomorrow morning. i put the drivers side on my chevelle and they fit great. they look very well made. all of them will include both sides of the collector.
thanks, Tim
2 sets left if anybody needs them. i dont and i really need my money back, so.........
thanks, Tim
2 sets left if anybody needs them. i dont and i really need my money back, so.........
#52
On The Tree
Thread Starter
iTrader: (3)
Join Date: Dec 2007
Location: Huntington Beach, Ca
Posts: 138
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
the headers are going out this morning. im dropping them off on may way to a short vacation. i wont have a computer until sunday night. i will send all tracking info at that point.
thanks, Tim
thanks, Tim
#57
TECH Senior Member
iTrader: (12)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
EdelExh - where is the best place to add the bung for the O2 sensor.. ?. on the 3" Collector or how will it work aft and on the bell flange / collector ?
Also.. does Edelbrock ship the Bell Flange collector in 3" to 2 1/2" reducers (as what I received was the 3" only).
Anyone that has completed there's.. where did you weld in your O2 Bung ?
Hope to do mine in a two weeks.
Also.. does Edelbrock ship the Bell Flange collector in 3" to 2 1/2" reducers (as what I received was the 3" only).
Anyone that has completed there's.. where did you weld in your O2 Bung ?
Hope to do mine in a two weeks.
#59
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Tim thanks again!
Put mine on over the weekend. Look Great! Need to remove starter, but bolt starter back in before bolting up headers...no big deal.
Can Anyone comment on bczee's questions:
"EdelExh - where is the best place to add the bung for the O2 sensor.. ?. on the 3" Collector or how will it work aft and on the bell flange / collector ?
Also.. does Edelbrock ship the Bell Flange collector in 3" to 2 1/2" reducers (as what I received was the 3" only).
Anyone that has completed there's.. where did you weld in your O2 Bung ?"
About ready to fire mine up for the first time, above answers would help!!
Thanks
Rick
Put mine on over the weekend. Look Great! Need to remove starter, but bolt starter back in before bolting up headers...no big deal.
Can Anyone comment on bczee's questions:
"EdelExh - where is the best place to add the bung for the O2 sensor.. ?. on the 3" Collector or how will it work aft and on the bell flange / collector ?
Also.. does Edelbrock ship the Bell Flange collector in 3" to 2 1/2" reducers (as what I received was the 3" only).
Anyone that has completed there's.. where did you weld in your O2 Bung ?"
About ready to fire mine up for the first time, above answers would help!!
Thanks
Rick