Which ECM brackets?

Reply Subscribe

Thread Tools

Search this Thread

Jul 15, 2008 | 12:17 AM

AustinYukon

Thread Starter

Launching!

iTrader: (5)

Joined: May 2003

Posts: 299

Likes: 0

From: Austin, Texas

Which ECM brackets?

The one I have is broken.

Anyway, what ECM mounts or brackets are you guys using?

I've got the 0411 ECM

I cannot find any used

Jul 15, 2008 | 09:14 AM

Carshopinc.com

LS1TECH Sponsor

iTrader: (5)

Joined: Sep 2007

Posts: 645

Likes: 0

From: Moline, ILLINOIS

I found that the fullsize truck and vans have a flat bracket that can be mounted nice.....

Jul 15, 2008 | 09:58 AM

Chevy-art

On The Tree

iTrader: (4)

Joined: Mar 2007

Posts: 105

Likes: 1

From: San Antonio, TX

That is good to know because I also need one. Time to start looking.

Jul 15, 2008 | 10:46 AM

01WS6/tamu

TECH Senior Member

iTrader: (37)

Joined: Oct 2004

Posts: 5,121

Likes: 74

From: somewhere in TX

chevy s10 bracket works nice.

Jul 15, 2008 | 12:24 PM

AustinYukon

Thread Starter

Launching!

iTrader: (5)

Joined: May 2003

Posts: 299

Likes: 0

From: Austin, Texas

Great, thanks guys.

Where in the trucks and Vans are the ECM's located?

Jul 15, 2008 | 01:48 PM

Jon05CTSV

Staging Lane

Joined: Mar 2008

Posts: 81

Likes: 0

From: Dallas, TX

It's in the left fender apron on both. The van is located more to the front, and the pickup mounts to the fender at the top of the left front wheel well.

Jul 15, 2008 | 02:19 PM

rockytopper

TECH Resident

Joined: Nov 2007

Posts: 816

Likes: 0

From: Texas

yukon not sure if this helps or which bracket you have. I purchased a used one off of ebay which also broke after I hung it from a rope by it's mounting leg or angle test driving the car with out a front end. I was able to use it by fabbing 1-3/4 inch high channel or angle which was the perfect height and screwing it to the bracket to use as the mounting leg or angle.