Driveshaft Loop Help
Driveshaft Loop Help Anyone reccommend one that fits a convertible?
Edit: Its an '01 Camaro. Single 3" exhaust.
Edit: Its an '01 Camaro. Single 3" exhaust.
Last edited by AnotherScreenName; Mar 8, 2005 at 09:33 AM.
Ive got the spaun torque arm and it has a loop on it. I would definitly recommend the torque arm. If you dont have an aftermarket one you will be very supprised in the results.
Billy
Billy
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Originally Posted by Ragtop 99
A couple years back I tested a couple of them and would fit on my car w/o modification
Did you mean to say "NONE" would fit without modification?
i just removed a BMR d/s loop from my vert and it doesn't look like there was any modifications made to fit it. if you're interested, i'll let it go for $50 shipped. looks great, is black, and was only on the car for about 3000 miles max. take a look on BMR's site and pm me if you're interested. Speed Inc. installed it with a bunch of other things so that's why i say it doesn't look like anything was done to make it fit. you can call BMR too and just ask them if you want. let me know when you get around to it if you are interested.
later,
Dave
later,
Dave
Originally Posted by PRAY HRD
i just removed a BMR d/s loop from my vert and it doesn't look like there was any modifications made to fit it. if you're interested, i'll let it go for $50 shipped. looks great, is black, and was only on the car for about 3000 miles max. take a look on BMR's site and pm me if you're interested. Speed Inc. installed it with a bunch of other things so that's why i say it doesn't look like anything was done to make it fit. you can call BMR too and just ask them if you want. let me know when you get around to it if you are interested.
later,
Dave
later,
Dave
Thanks for the offer. I will keep it in mind and research it a bit. I am, right now, leaning towards the spohn TA with loop.
TECH Veteran
Joined: Dec 2004
Posts: 4,012
Likes: 1
From: Beaumont, TX
Originally Posted by HOSS99
The SLP Drive Shaft Loop fits Convertibles. I have one on my 'vert.
https://ls1tech.com/forums/convertible-vehicles/117378-vert-drive-shaft-safety-loop.html (Don't know if they're talking about with modifying it or not.) 
