Convertible timeslip thread
best pass to date: on a .057 r/t - 1.915 60', 8.164 1/8 @ 86.96 mph, 12.656 1/4 @ 110.32 mph. did this with new moser 9" 3:89 gear, bmr adjustable rca's, m/t et fronts 24x4.5-15's, m/t et street radials 275/50r15's out back, open cut out, jet hot l/t headers, dyno tune @ 327.8 hp / 337.3 torque. everything else pretty much stock 2002 ss convertible #8809. also like to say to everyone in northeast texas, southwest arkansas, northwest louisiana come visit red river raceway, it's a great track and you will enjoy yourself.
Teching In
Joined: Oct 2005
Posts: 16
Likes: 0
timeslip Ran at Fay.{nam} 3/24/07 all motor 10:70 @124 6:77 @101 1:48 60ft terrible air sprayed 150 shot 10:22 @128 letting off nitrous at 1/8 going through 7800 rpm 1/8 6:41 @ 106 3600 convert with sloan engine and stone fabrication setup
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Teching In
Joined: Nov 2006
Posts: 40
Likes: 0
From: Houston Tx
13.2 @ 109 2.6 60ft. All i did was take the catback off for that trip to the drag strip. Other than that im bone stock. I had bald 275s, on lonestar raceway which accounts for the shitty 60ft time. I have 315 drag radials now, just waiting for the right time to take it back out. The car was whatever factory weight is, spare tire included.
On The Tree
Joined: Oct 2003
Posts: 113
Likes: 0
From: Corpus Christi Texas
la to uk all i have on mine is a lid and hooker cat-back. in louisiana i ran a best 13.37 with just the lid. here in england with lid and hooker cat-back i ran a best 13.49, WTF? is there a diff in climate that made my run here slower? i use the base gas 92 octane.
time slip 
Teching In
Joined: May 2005
Posts: 40
Likes: 0
From: PA
times in sig.....
last August I think. stock except for free mods, cat back, lid, and 150 shot
Not sure on gear, A4
Hoping to beat them this year if there is ever a Saturday in Erie when it dosen't rain or I don't have to work!!!!!
last August I think. stock except for free mods, cat back, lid, and 150 shot
Not sure on gear, A4
Hoping to beat them this year if there is ever a Saturday in Erie when it dosen't rain or I don't have to work!!!!!
http://rides.webshots.com/photo/2108...43971568xjtOYJ
60 ft - 1.471
1/8th - 6.41 @ 110.01
1000 - 8.31
1/4 - 9.90 @141.88
C5R Blocked 427, 6.0 heads
Face Plated t-56
200 NX DP w/ Std fuel system
3600 lbs with driver
3:73 gears moser 12 bolt
525 RWHP/RQRQ NA
700+ RWHP/800 RWTQ on 200 shot
60 ft - 1.471
1/8th - 6.41 @ 110.01
1000 - 8.31
1/4 - 9.90 @141.88
C5R Blocked 427, 6.0 heads
Face Plated t-56
200 NX DP w/ Std fuel system
3600 lbs with driver
3:73 gears moser 12 bolt
525 RWHP/RQRQ NA
700+ RWHP/800 RWTQ on 200 shot
Teching In
Joined: May 2007
Posts: 12
Likes: 0
From: Wisconsin
I was at the strip tonight and thought I'd share the times. This was my second time ever at the track so there is room for improvement in my driving......maybe, the times were consistent for the most part (you tell me)
1st R/T .650, 60' 2.230, 1/4 13.773@ 106.10
2nd R/T.114, 60' 2.194, 1/4 13.622@106.67
3rd R/T .538, 60' 2.078, 1/4 13.547@104.03
4th R/T .323, 60' 2.241, 1/4 13.570@ 104.8
This was done with a stock 02, WS6 convertible.
Tim
1st R/T .650, 60' 2.230, 1/4 13.773@ 106.10
2nd R/T.114, 60' 2.194, 1/4 13.622@106.67
3rd R/T .538, 60' 2.078, 1/4 13.547@104.03
4th R/T .323, 60' 2.241, 1/4 13.570@ 104.8
This was done with a stock 02, WS6 convertible.
Tim
