New wheels on the Z06 and F1R done...
#1
New wheels on the Z06 and F1R done...
Now Im waiting on a bigger fuel system and the Cartek flip drive kit and shes done. Dont know if Ive went into any detail about the car on here but its an iron 6.0 30 over, F1R Head unit.
I ran out of fuel with the current fuel system. It throws a 1514 code when the fuel pressure plummets and goes into reduced power mode at around 5500 rpm. With 11 degrees timing at 5200 it made 710 at 11.3 lbs. Then she fell on her face. BTW this was dynoed on a dynocom with an eddie brake set at %15
Got the CCWs on this weekend and thought Id snap a few pictures and play around editing. Enjoy
Before it was done
I ran out of fuel with the current fuel system. It throws a 1514 code when the fuel pressure plummets and goes into reduced power mode at around 5500 rpm. With 11 degrees timing at 5200 it made 710 at 11.3 lbs. Then she fell on her face. BTW this was dynoed on a dynocom with an eddie brake set at %15
Got the CCWs on this weekend and thought Id snap a few pictures and play around editing. Enjoy
Before it was done
Last edited by EkDream; 09-03-2012 at 05:18 PM.
#2
The pic's look great, nice job! Bob
__________________
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
#5
I was going to call RSI. Well I already have but they have proven to be hard to get on the phone so Im always open to suggestions. My only issue is that I want to use in tank pumps and use the oem fuel sending unit. Going to do 2 or 3 Aeromotive 340s. Depends on what fuel I end up doing. As of right now the car is on 93.
Trending Topics
#10