Videos of mike's 10.84 and brent's 11.20 runs at ATCO.
#1
Banned
Thread Starter
Join Date: Nov 2001
Location: NJ
Posts: 511
Likes: 0
Received 0 Likes
on
0 Posts
Videos of mike's 10.84 and brent's 11.20 runs at ATCO.
Here is Mike's 10.84 run----> http://www.cartek.net/videos/mike1084.wmv
Here is Brent's 11.20 run ----> http://www.cartek.net/videos/brent1120.wmv
I don't have the videos from the first 2002 Cartek Corvette Challenge yet. There Mike ran 10.89, Brent ran 11.14 and Ramos ran 11.20s.
Great driving guys. <img border="0" alt="[cheers]" title="" src="graemlins/gr_cheers.gif" />
Here is Brent's 11.20 run ----> http://www.cartek.net/videos/brent1120.wmv
I don't have the videos from the first 2002 Cartek Corvette Challenge yet. There Mike ran 10.89, Brent ran 11.14 and Ramos ran 11.20s.
Great driving guys. <img border="0" alt="[cheers]" title="" src="graemlins/gr_cheers.gif" />
#2
On The Tree
Join Date: Nov 2001
Location: East Coast
Posts: 135
Likes: 0
Received 0 Likes
on
0 Posts
Re: Videos of mike's 10.84 and brent's 11.20 runs at ATCO.
Julio,Thanks for posting the video of my car.
<small>[ April 16, 2002, 08:13 PM: Message edited by: STEALTH C-5 ]</small>
<small>[ April 16, 2002, 08:13 PM: Message edited by: STEALTH C-5 ]</small>
#5
On The Tree
Join Date: Nov 2001
Location: East Coast
Posts: 135
Likes: 0
Received 0 Likes
on
0 Posts
Re: Videos of mike's 10.84 and brent's 11.20 runs at ATCO.
Thanks Nick,I know you've been busy but in regards to your new stepped header that we spoke about I've left a few messages on your voicemail and tried to reach you through the forums with no luck,what kind of numbers did it make on Wade's car N/A,you've obviously tested them.Thanks,Mike
#6
Launching!
Join Date: Jan 2002
Location: ONTARIO/CANADA
Posts: 252
Likes: 0
Received 0 Likes
on
0 Posts
Re: Videos of mike's 10.84 and brent's 11.20 runs at ATCO.
Hey Mike, we made a few changes and ran the car on the dyno with slicks? so not really sure how much we picked up on motor. Seemed to pick up lots on the No2(not just from the headers), we made just under 860rwhp with converter locked; couldn't measure the trqu.??
If I had to guess I would say about 8-10 rwhp Na with the headers, they still won't be ready to sell for a bit as they are on the car and need to loose them for about 5 weeks to get them copied!
I will let you know when they are ready, hopefully not to late.
If I had to guess I would say about 8-10 rwhp Na with the headers, they still won't be ready to sell for a bit as they are on the car and need to loose them for about 5 weeks to get them copied!
I will let you know when they are ready, hopefully not to late.