[pics]C6 Z06 mufflers/h-pipe, on the way to CA for fitment on base C6
#1
Closed ex-Sponsor Account
Thread Starter
Join Date: Mar 2004
Location: LONG ISLAND, NY; MADE IN THE USA
Posts: 513
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
removed these 2 weeks ago for the new B&B prt/bullet system
![](http://i9.photobucket.com/albums/a96/ctcorvette/c6z/c6z.jpg)
the valve
![](http://i9.photobucket.com/albums/a96/ctcorvette/c6z/c6z009.jpg)
3" H-pipe
![](http://i9.photobucket.com/albums/a96/ctcorvette/c6z/c6z007.jpg)
the stock system is removed in about 20 minutes(pass side muffler is very tight); plan on having a 3" ex. pipe expander to make the slip joint on the B&B adjustable, the aft slip fittings on the center prt chamber were not easy to work with(prior to making fitting round again)
we used one of the B&B boxes to pack the oem Z exhaust, 80lbs
![](http://i9.photobucket.com/albums/a96/ctcorvette/c6z/c6z.jpg)
the valve
![](http://i9.photobucket.com/albums/a96/ctcorvette/c6z/c6z009.jpg)
3" H-pipe
![](http://i9.photobucket.com/albums/a96/ctcorvette/c6z/c6z007.jpg)
the stock system is removed in about 20 minutes(pass side muffler is very tight); plan on having a 3" ex. pipe expander to make the slip joint on the B&B adjustable, the aft slip fittings on the center prt chamber were not easy to work with(prior to making fitting round again)
we used one of the B&B boxes to pack the oem Z exhaust, 80lbs