Corvette Racing Seats - Need Your Opinion
#81
I've been reading that guys who put these in C6s have trouble because the car disables the airbag. Also, those with side-airbags have issues as well, such as beeping idiot lights and such. Any solution to this?
#83
We are looking into pricing to sponsor on larger Vette forums. Unfortunately, if we do that we may have to raise the pricing on the seats to cover advertising costs. Since we don't have many sets coming (12 total between black leather and cloth) we were hoping to generate enough interest here.
#84
TECH Enthusiast
iTrader: (2)
Join Date: Mar 2006
Location: West Norriton, PA
Posts: 674
Likes: 0
Received 0 Likes
on
0 Posts
We have not looked into that. Our goal was to first see if we could provide a less costly seat that would fit. Let's see if anyone here that has done it has any input.
We are looking into pricing to sponsor on larger Vette forums. Unfortunately, if we do that we may have to raise the pricing on the seats to cover advertising costs. Since we don't have many sets coming (12 total between black leather and cloth) we were hoping to generate enough interest here.
We are looking into pricing to sponsor on larger Vette forums. Unfortunately, if we do that we may have to raise the pricing on the seats to cover advertising costs. Since we don't have many sets coming (12 total between black leather and cloth) we were hoping to generate enough interest here.
You get codes if check your system for the SCM (Seat Control Module).
Try it you'll see what I am talking about.
Picture below of SCM
#85
If the seat you removed had airbags would the computer module recognize they are now missing?
#89
TECH Enthusiast
iTrader: (2)
Join Date: Mar 2006
Location: West Norriton, PA
Posts: 674
Likes: 0
Received 0 Likes
on
0 Posts
I had to use the C5 SCM because the C6 SCM is a different wiring bus. I would bet the SCM gets a signal from the air bag controller thru the SCM so I am 90% sure this would work.
The reason why I say this is I had a 2002 Z06 and it would not run without the SCM in place in the drivers' side.
#91
These are being imported and we will not have anything before June. Until we receive a ship date in May we will not have an estimated arrival date but it could even be late in June.
#95
TECH Senior Member
iTrader: (2)
We are also developing a bracket/slider combination to bolt this bucket seat in as a complete manual sliding unit. This way if you need a nice track seat just unbolt your factory seat from the floor and bolt this one in. How many people would be interested if it came with everything to just bolt it to the four holes in the floor for quick swapping for the track?
Robert
#97
#98
TECH Resident
Join Date: Dec 2003
Location: Long Island, NY
Posts: 797
Likes: 0
Received 0 Likes
on
0 Posts
the leather ones look nice and Im in for the black leather (yellow stitching would be nice for my car but red could work. 03 yellow zo6). I will help get the word out on other forums once I see them and hopefully keep pricing low.
#99
http://forums.corvetteforum.com/show...post1565123701
Most forums do not allow what they consider advertising for non-sponsors. CorvetteForum.com has the rules below.
"Forum members are welcome to sell a Corvette or Corvette parts they purchased for their own personal use. Anything else is considered to be a commercial sale."
"Members are not prohibited from mentioning it when they have a good (or bad, for that matter) experience with a non-supporting vendor. But such mentions cannot be so specific (address, phone number, e-mail address, URL, price, part number, etc.) and so frequent that they become marketing and promotional references."