C5 push button start
Here is a pic of my old Z28 push button start.

Now here is a great install I used for the Z28
http://www.pitreweb.com/s2000sw.htm
Now although I found the same thre wires for the install under the C5's dash ie red bat 12v+ pink 12v+ Acc live and yellow to the starter when I wired in my relay the car would not start. key was in and on and car in park.
I could here the relay was clicking and 12v+ was coming out of pin 87 which goes to the yellow starter wire but no start.
I have a schematic of the C5 ignition if that helps anyone help me! This was kindly provided by someone on another MB

Has anyone else successfully done this to there C5?
Last edited by 97vetteman; Aug 10, 2011 at 01:14 PM.


