Fastest ls1?
Thread Starter
TECH Enthusiast
Joined: Jul 2007
Posts: 670
Likes: 1
So casper is the fastest lsx doorslammer record?
Trending Topics
Casper was def the quickest LS powered doorcar in the sixes
Paul Major went the quickest on radials so far 7.11
We went the quickest on true stock style suspension and radials with our 7.29
but that was on 7 cyls went a 4.82 to the 1/8,best 1/8 is a 4.70
The Ohio boys are the quickest stock suspension f bodies with i believe a 7.44
hope this helps
Paul Major went the quickest on radials so far 7.11
We went the quickest on true stock style suspension and radials with our 7.29
but that was on 7 cyls went a 4.82 to the 1/8,best 1/8 is a 4.70
The Ohio boys are the quickest stock suspension f bodies with i believe a 7.44
hope this helps
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo Thread Starter
TECH Enthusiast
Joined: Jul 2007
Posts: 670
Likes: 1
Casper was def the quickest LS powered doorcar in the sixes
Paul Major went the quickest on radials so far 7.11
We went the quickest on true stock style suspension and radials with our 7.29
but that was on 7 cyls went a 4.82 to the 1/8,best 1/8 is a 4.70
The Ohio boys are the quickest stock suspension f bodies with i believe a 7.44
hope this helps
Paul Major went the quickest on radials so far 7.11
We went the quickest on true stock style suspension and radials with our 7.29
but that was on 7 cyls went a 4.82 to the 1/8,best 1/8 is a 4.70
The Ohio boys are the quickest stock suspension f bodies with i believe a 7.44
hope this helps
TECH Fanatic
Joined: Sep 2007
Posts: 1,244
Likes: 7
From: hattiesburg, Ms
Sounds good, I had been curious to know how fast Major's car has gotten.
Dam good job to the Ohio boy's, I am really impressed with there cars. I guess S.A.M. has the all motor record with "Stock Style" suspension.
Dam good job to the Ohio boy's, I am really impressed with there cars. I guess S.A.M. has the all motor record with "Stock Style" suspension.
Thread Starter
TECH Enthusiast
Joined: Jul 2007
Posts: 670
Likes: 1
Thanks, I'm still running truck manifolds on the TA. We have headers on the Camaro. So far the truck manifolds are doing well. I'm one of the few who have gone over 200mph with a single turbo.
Thanks a lot! Now that I have a legal cage in the car. Wait till you see what we run this year.
Thanks a lot! Now that I have a legal cage in the car. Wait till you see what we run this year.
I have a set of stainless works headers here I may use, but I am thinking of selling them and just using the manifolds.
Have you seen any difference between the two?
Casper 6.86@205 tube chassis
Hardcore went 6.9X tube chassis
Cv went 7.0X@ 212!! Tube chassis. They had trans trouble that would not allow them to leave on full power.
Mike Brown and Paul Major went over 200mph on stock style suspension.
Phil will probably get over 200 this year.
Jim at Speed inc got kicked out of Maxton for going 199mph after driving the car from Chicago=Maxton North Carolina. I guess they wanted a legal cage in the car!
These are the fastest cars I know of, but they are coming out of the woodwork now! Should see a new flock of fast cars this year I would guess, as better parts become more available.
Kurt
Hardcore went 6.9X tube chassis
Cv went 7.0X@ 212!! Tube chassis. They had trans trouble that would not allow them to leave on full power.
Mike Brown and Paul Major went over 200mph on stock style suspension.
Phil will probably get over 200 this year.
Jim at Speed inc got kicked out of Maxton for going 199mph after driving the car from Chicago=Maxton North Carolina. I guess they wanted a legal cage in the car!
These are the fastest cars I know of, but they are coming out of the woodwork now! Should see a new flock of fast cars this year I would guess, as better parts become more available.
Kurt
From what we have seen... I wish I would have saved my time and money on building headers. At least on a single turbo setup. Were still having to move all the exhaust thru the same size turbine inlet. Now if it was a twin setup I think the manifolds may be a restriction at this power level.
Jim at Speed inc got kicked out of Maxton for going 199mph after driving the car from Chicago=Maxton North Carolina. I guess they wanted a legal cage in the car!
These are the fastest cars I know of, but they are coming out of the woodwork now! Should see a new flock of fast cars this year I would guess, as better parts become more available.
Kurt
These are the fastest cars I know of, but they are coming out of the woodwork now! Should see a new flock of fast cars this year I would guess, as better parts become more available.
Kurt
Thanks, I'm still running truck manifolds on the TA. We have headers on the Camaro. So far the truck manifolds are doing well. I'm one of the few who have gone over 200mph with a single turbo.
Thanks a lot! Now that I have a legal cage in the car. Wait till you see what we run this year.
Thanks a lot! Now that I have a legal cage in the car. Wait till you see what we run this year.
Your car is the reason my car has truck manifolds on it, lol.
Casper in tube chassis
That's it... Everybody else has a bunch of work to catch up still.
If I am lucky I will have a shot at running with all these big dogs Kurt mentioned but I am already way behind the curve with a 7.51 best under my belt 2 years ago.
Tom
