first time at gateway
#1
11 Second Club
Thread Starter
iTrader: (5)
Join Date: Oct 2010
Location: Stl Missouri
Posts: 397
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
i did 5 passes, first 4 were between 13.70-13.79 and the last one was 13.83.
best 60 foot was 2.19, worst was 2.33![Sad](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_sad.gif)
traps were all 104, not sure whats going on just couldnt launch worth a ****
it was also my first time there, so i dont think i did to bad with only longtubes ory tune and lid mph wise.
i also have 2.73 rear gears![Sad](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_sad.gif)
da was 1843 at 9pm which was my last and worse pass, 13.830 2.330 60 foot and 104.2 mph
best 60 foot was 2.19, worst was 2.33
![Sad](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_sad.gif)
traps were all 104, not sure whats going on just couldnt launch worth a ****
it was also my first time there, so i dont think i did to bad with only longtubes ory tune and lid mph wise.
i also have 2.73 rear gears
![Sad](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_sad.gif)
da was 1843 at 9pm which was my last and worse pass, 13.830 2.330 60 foot and 104.2 mph
#3
11 Second Club
Thread Starter
iTrader: (5)
Join Date: Oct 2010
Location: Stl Missouri
Posts: 397
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
yea i have no idea what was up with that, no matter what i did i couldnt get it down at all. im gonna try with my 315/35/17 nt05r's. i had nt555s 275/40/17s on today.
#5
11 Second Club
Thread Starter
iTrader: (5)
Join Date: Oct 2010
Location: Stl Missouri
Posts: 397
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
the track seemed a little slippery still, nobody i know was getting really good 60 foots.
im planning on getting a 3.42 rear end out of a m6 car to replace my crappy 2.73's, and ill bring some drag radials next time, what else should i do to get that 60 foot down?
im planning on getting a 3.42 rear end out of a m6 car to replace my crappy 2.73's, and ill bring some drag radials next time, what else should i do to get that 60 foot down?
Last edited by 1999transamls1; 03-21-2012 at 07:03 AM.
Trending Topics
#8
TECH Addict
iTrader: (21)
Join Date: Dec 2006
Location: Port Saint Lucie,Florida
Posts: 2,767
Likes: 0
Received 1 Like
on
1 Post
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Low Air pressure like 25PSI Street tires 18 PSI drag radials,Suspension and figure out were your car likes to b launched like off idle or bring the RPM up little @ a time until you find the sweet spot w/ a better 60 ft and Yes get a 3:42 Rear they r perfect for auto's !!!!
#10
11 Second Club
Thread Starter
iTrader: (5)
Join Date: Oct 2010
Location: Stl Missouri
Posts: 397
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Also I'm doing a yank 4000 converter later this year, just wanna get some suspension stuff and sticky tires first. I might go back next tuesday with drag radials and see if that helps over my 275 street tires
![Icon Lol](https://ls1tech.com/forums/images/smilies2/icon_lol.gif)
#11
TECH Resident
Join Date: Oct 2005
Location: Champaign IL
Posts: 814
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
your car is missing AT LEAST 5mph!!! MINIMUM!!! runs like a STOCK car.. and not just stock, but a SLOW stock car... not hating on you, but you gotta figure out what is wrong!! SERIOUSLY dude, thats a full second off pace..... something aint right.. you gotta any issues goin on that youre not tellin us????
#12
11 Second Club
Thread Starter
iTrader: (5)
Join Date: Oct 2010
Location: Stl Missouri
Posts: 397
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Not that I know of, only thing I can think of is the 2.73s are holding me back, but still I thought it would be faster. It was also my first time at a drag strip ever. I was thinking it would be high 12's which looks right with a 1.8 60 foot
Last edited by 1999transamls1; 03-21-2012 at 01:29 PM.
#13
11 Second Club
Thread Starter
iTrader: (5)
Join Date: Oct 2010
Location: Stl Missouri
Posts: 397
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Also I think muffler is a restriction, it's a dynamax turbo 1 in 2 out. I'm gonna get a cut out and see if that helps. I had lm1 on it but it was welded bad so I thought this was a good replacement, but right after it felt slower
EDIT: talked to my tuner about knock sensor code i had/have, he said its pulling 8 degrees of timing, hes gonna go out with me one day and log the run and we'll see
![Sad](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_sad.gif)
EDIT: talked to my tuner about knock sensor code i had/have, he said its pulling 8 degrees of timing, hes gonna go out with me one day and log the run and we'll see
Last edited by 1999transamls1; 03-21-2012 at 01:30 PM.
#17
11 Second Club
iTrader: (3)
Join Date: Jul 2006
Location: Fredericksburg,Va
Posts: 819
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
My PB with 273s and stock stall with bad knock sensors. with LT's/ORY/Free Mods/Lid/K&N/NGK TR55s/8.5mm MSD/Smooth bellows.is an 2.03 60ft 12.97@107.88. The DA was 890-960..
Oh ya what did the 1/8 look like and how much mph did you gain from the 1/8 to the 1/4. My car does its best from Idle to wot with stock stall/gear
Oh ya what did the 1/8 look like and how much mph did you gain from the 1/8 to the 1/4. My car does its best from Idle to wot with stock stall/gear
Last edited by 1Bad97WS-6; 03-21-2012 at 09:02 PM.