cam only plus 75 shot
#1
On The Tree
Thread Starter
Join Date: Aug 2011
Location: dora al
Posts: 157
Likes: 0
Received 0 Likes
on
0 Posts
cam only plus 75 shot
I finally got to run the new setup tonight. here is a quick breakdown of it
stock 105k mile bottom end and heads other than springs and retainers
225/229 cam, .615 lift
revmax 3600 stall
3.42 geared 10 bolt
nos wet kit with a 40n 24f tuneup I believe
on motor the car went 7.64 at 90
on a 75 shot the car went a 7.33 at 94 and pulled the drivers front about 6 inches lol. bottle pressure was barely 900 so there should be a little bit left. The car is far from setting the world on fire but I am very happy with it
stock 105k mile bottom end and heads other than springs and retainers
225/229 cam, .615 lift
revmax 3600 stall
3.42 geared 10 bolt
nos wet kit with a 40n 24f tuneup I believe
on motor the car went 7.64 at 90
on a 75 shot the car went a 7.33 at 94 and pulled the drivers front about 6 inches lol. bottle pressure was barely 900 so there should be a little bit left. The car is far from setting the world on fire but I am very happy with it
#3
On The Tree
Thread Starter
Join Date: Aug 2011
Location: dora al
Posts: 157
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
#8
On The Tree
Thread Starter
Join Date: Aug 2011
Location: dora al
Posts: 157
Likes: 0
Received 0 Likes
on
0 Posts
I went again tonight and went a 7.23 at 93 with a 1.57 60ft. The car hit the limiter on the 2-3 shift so I let off. I think it would have went 7.19 or so if it didn't hit the limiter
#9
Hey man, any chance I could get you to post a quick vid of idle with that thing? I'm very interested in your set up if you catch my drift...
One more, what would you expect to see in the quarter with it if you were to do so?
One more, what would you expect to see in the quarter with it if you were to do so?
#10
On The Tree
Thread Starter
Join Date: Aug 2011
Location: dora al
Posts: 157
Likes: 0
Received 0 Likes
on
0 Posts
I don't have a video camera. I have never ran the car in the 1/4 since the closest one is about 1 1/2 hours away. I would guess the car to run 11.9-12.1 on motor and 11.4-11.5 on spray
#11
I am really liking the numbers you have on that cam. I'm probably leaning toward something like 228/228 560-590. I think what you have is pretty spot on to what I would like to see in mine. Looks like you are making great power for the mods man, good work!!
#12
On The Tree
Thread Starter
Join Date: Aug 2011
Location: dora al
Posts: 157
Likes: 0
Received 0 Likes
on
0 Posts
ran again tonight, the air was probably in the 50's and the bottle pressure was from 950-1050. The best was a 7.18 at 95 with a 1.56 60ft. I also went a 7.22 at 95, a 7.24 at 94 and a 7.29 at 95 with the cutout closed
#13
11 Second Club
iTrader: (33)
Join Date: Aug 2004
Location: Gloucester, VA
Posts: 819
Likes: 0
Received 0 Likes
on
0 Posts
A 1.56 short time with completely stock suspension and 3600lbs is sweet. Very nice, I bet the quarter mile times would be good especially with the n2o in full effect on the top end lol
#14
On The Tree
Thread Starter
Join Date: Aug 2011
Location: dora al
Posts: 157
Likes: 0
Received 0 Likes
on
0 Posts
I think it would go 11.25 at 118 in the 1/4 is my guess lol. We are going to jet it for 125 and go for a 6.99 pass