Dragaholic 10.34@127.46 (1.36), 00 SS, TH350, Protorque, 4.56, T-ReX, -700, 2850, 11/18/05

 

I still do not think I can beat you Rodney. I think it is time to retire the old cam only engine and put the big cubes in the car this winter

 

i have a question on cam only? w/ the differences between the 853s and the 241s both being stock heads, can we go from 853s to 241s? since they are still stock heads and untouched or no.

just trying to find out whats allowed and whats not

thanks
brandon

 

i dont see why not.. u can swap a ls6 intake found on a 02 car onto a 98 with a ls1.. why not head castings as long as there left stock.. i have 241's and ls6's on my car stock and i dont see a problem with it..

hell i think ur allowed to swap a fast90 on there..

anywyas just a suggestion but could we maybe start putting the state the person is from in there as well.. like at the end.. T.X. for texas or S.C. for south carolina ect.. i know it says location in there thing but some ppl dont put that

 

Can you update me , new PB cam only 11.692@115.03 1.563 60ft . Thanks. This was also updated in my user on 1/19.

 

congrats man

 

Thanks SMOKIN01TA, my 1/8 mile time is 7.417@91.28 i think u need this for the update.

 

na, i dont need that, i just need you to go about 4 tenths faster to get back on the list, it only keeps the top 15 people and i think 15 is 11.2's or so

 

Then does that mean you can also run a stock 243 casting or is that going to far now?


ALSO I 100% agree with adding the state the run was made in or the state where the owner of the car lives.

 

OOPS,sorry i thought i was posting this for the e.t. timeslip database cam only list which im on . thanks for the replys ,but i might just try and make this list just for the challenge.

 

What are ya'll M6 guys launching @ with the T-Rex or MS3. Just installed 2 step and was wondering.

 

6800 - 7000 rpms here

 

im still looking for an answer by a mod on my ?

now for the ? about 243s i think not cause they didnt come stock on an F-Body.

but id like to put stock 241s on, if not then ill just run these 853s


-brandon

yea untouched 241's with stock height head gaskets are fine

 

haha, oops i edited your post accidentaly instead of hitting quote
anyway theres your answer

 

cool thanks....

now i just gotta find some stock 241s laying around

 

i hope your motor is already apart and your not just swapping heads to have 241's.

 

well ill do the stock 241s w/ stock gaskets and cam in march/april at the same time.

SUX2BU... im trying catch your mph b4 i go cam only. im still not on the SI list yet

-brandon

 

Hey Smokin01ta what is the mph record?

 

i went 131.46 i know off, may have gone a bit more