ls1 malibu wagon

Thread Tools
 
Search this Thread
 
Old 03-24-2007, 06:08 PM
  #21  
TECH Apprentice
Thread Starter
iTrader: (1)
 
Darracq's Avatar
 
Join Date: Sep 2006
Posts: 364
Likes: 0
Received 1 Like on 1 Post

Default

Ran a 12.32 @ 109.62

1.70 60 ft

open headers with a 15inch extensions 2 1/2 inch

should of ran in the .20s on another pass but i had a 1.77 60 and ran a 12.33 @ 109.86 Drag radials are not hooking so good, and carb still has some problems. It was also about 10 degrees hotter and high humidity, da sucked.

Last edited by Darracq; 03-24-2007 at 06:19 PM.
Old 03-24-2007, 09:00 PM
  #22  
LS1Tech Co-Founder
iTrader: (34)
 
Pro Stock John's Avatar
 
Join Date: Nov 2001
Location: Chicago, IL
Posts: 44,727
Received 1,175 Likes on 764 Posts

Default

Where did you shift it? Sounds good.
Old 03-25-2007, 08:15 AM
  #23  
TECH Apprentice
Thread Starter
iTrader: (1)
 
Darracq's Avatar
 
Join Date: Sep 2006
Posts: 364
Likes: 0
Received 1 Like on 1 Post

Default

About 5800, i was side by side with a monte one pass and when i shifted i would start to pull right away. so i think i was shifting about right. was still getting the break up if i went past that in first. i need to try a different carb.



Quick Reply: ls1 malibu wagon



All times are GMT -5. The time now is 06:31 PM.