All Time Fastest NA LS any C.I.
11-22-2007, 10:02 PM
#81
9 Second Club
Join Date: Feb 2002
Location: Tampa, FL
Posts: 2,252
Likes: 0
Received 0 Likes
on
0 Posts
I can post here or you can pm you number and I can call you when I decide.
I am going to set the front shock very tight as the car continues to go up then right back down then up again. Pretty weird.
11-23-2007, 04:43 PM
#83
I really want to go Saturday but cannot as I have to go into NY. That leaves Friday night and Sunday. From what I understand Sunday they are making up a Ford/buick thing and I am afraid I will get shut out. Friday night then seems best but I am afraid it might get too cold. It think I am going to plan on Friday night but will be calling them to make sure they plan to open.
I can post here or you can pm you number and I can call you when I decide.
I am going to set the front shock very tight as the car continues to go up then right back down then up again. Pretty weird.
I can post here or you can pm you number and I can call you when I decide.
I am going to set the front shock very tight as the car continues to go up then right back down then up again. Pretty weird.
12-01-2007, 01:50 AM
#91
FormerVendor
LS1Tech has a new fastest NA car as the familiar orange SAM SS driven by Judson Massingill just went an 8.75 @ 153 tonight according to what I heard from some of their guys! Chris up there told me that Judson had run out of gear by around the 1000 foot mark so they will go a little faster once they put a slightly taller gear in the car. 
12-01-2007, 07:08 AM
#92
LS1Tech has a new fastest NA car as the familiar orange SAM SS driven by Judson Massingill just went an 8.75 @ 153 tonight according to what I heard from some of their guys! Chris up there told me that Judson had run out of gear by around the 1000 foot mark so they will go a little faster once they put a slightly taller gear in the car.
That's absolutely amazing.
Major props to the S.A.M crew!
12-02-2007, 08:40 AM
#93
Banned
iTrader: (18)
Join Date: Aug 2003
Location: Wayne, NJ
Posts: 2,984
Likes: 0
Received 0 Likes
on
0 Posts
Oooh, Kerminator made the list 
417ci L92 based
TTP Stage 4R AFR 225cc Cathedral port heads (Massaged in house)
Comp XE Lobe Cam running stock 1.7 rockers @ .595 lift right now (Going to 1.8s)
TH350 w/ transbrake
4200 stall (Was meant for nitrous)
30" hoosier radial slicks
4.11 gears (Crossing traps @ 6200 on that pass)
Ash: Do I understand you are the fastest NA hydraulic roller cam?
417ci L92 based
TTP Stage 4R AFR 225cc Cathedral port heads (Massaged in house)
Comp XE Lobe Cam running stock 1.7 rockers @ .595 lift right now (Going to 1.8s)
TH350 w/ transbrake
4200 stall (Was meant for nitrous)
30" hoosier radial slicks
4.11 gears (Crossing traps @ 6200 on that pass)
Ash: Do I understand you are the fastest NA hydraulic roller cam?
Last edited by TTPMatt; 12-02-2007 at 08:45 AM.
12-04-2007, 05:36 PM
#98
Banned
iTrader: (18)
Join Date: Aug 2003
Location: Wayne, NJ
Posts: 2,984
Likes: 0
Received 0 Likes
on
0 Posts
Yep they do. I am going this Saturday Dec 8th and Sunday the 9th.
Our car is going on our dyno tomorrow as-is (Still no tuning), I'll know what numbers I was pushing on the 9.94 pass. I hope to see a nice fat carb'd 11:1 air/fuel ratio so I can tune it up to 12.7 and see some HP. I also was running modest timing, I hope to add about 4 degrees to that, I want to run it safe.
Would be pretty cool to line both cars up.
Our car is going on our dyno tomorrow as-is (Still no tuning), I'll know what numbers I was pushing on the 9.94 pass. I hope to see a nice fat carb'd 11:1 air/fuel ratio so I can tune it up to 12.7 and see some HP. I also was running modest timing, I hope to add about 4 degrees to that, I want to run it safe.
Would be pretty cool to line both cars up.
12-09-2007, 03:14 PM
#99
TECH Enthusiast
iTrader: (6)
Join Date: Nov 2004
Location: Knoxville, TN
Posts: 549
Likes: 0
Received 0 Likes
on
0 Posts
Fastest NA LS any C.I. http://forums.corvetteforum.com/show....php?t=1883904 should prove that I am legit on my times. I ran 9.932@136.84 the next weekend at the darlington carolina corvette challenge. My car is a 2000 C5 A4 N/A 427, 3200#, hydraulic cam. Let me know if you need more information in order to add me to the list. Thanks. Danny.