12.29 Almost there !!! cam only car, 1.68 60 ft, with pic
#1
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
alrighty, just got back from the track,
mods are in my sig and the car domain page for full list.
the only thing i did for the track was put on a set of et streets and take out my front sway bar.
ran a 1.68 60 ft,
12.29 @ 112 mph, 1\4. this is with a 25 mph headwind, ( it sucked *** )
with no wind, or a tail wind, is it possible that i could knock off those 3 tenths that are keeping me from the 11 mark.
im launching at 6000 rpm, and dumping the clutch. its leaving hard. suspension is set up for auto-x and road race, not drag.
check out this sidewall wrinkle action.
mods are in my sig and the car domain page for full list.
the only thing i did for the track was put on a set of et streets and take out my front sway bar.
ran a 1.68 60 ft,
12.29 @ 112 mph, 1\4. this is with a 25 mph headwind, ( it sucked *** )
with no wind, or a tail wind, is it possible that i could knock off those 3 tenths that are keeping me from the 11 mark.
im launching at 6000 rpm, and dumping the clutch. its leaving hard. suspension is set up for auto-x and road race, not drag.
check out this sidewall wrinkle action.
![](https://ls1tech.com/forums/attachments/drag-racing-results/105317-12-29-almost-there-cam-only-car-1-68-60-ft-pic-wrinkle-wall.jpg)
#3
7 Second Club
iTrader: (5)
Join Date: Nov 2001
Location: Gainesville, Florida # of drag strips runs: ?!?!?
Posts: 8,834
Likes: 0
Received 1 Like
on
1 Post
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Not sure where you are racing (part of the country) but cooler air will help out some, and as mentioned skinny wheels & tires will cut down rolling resistance to help out some.
Good luck!
Derek
Good luck!
Derek
#7
Retired Street Racer
iTrader: (49)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by shocker45
slicks. not to many dr's will hook that nicely ![Tongue](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_tongue.gif)
![Tongue](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_tongue.gif)
![Winky](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_wink.gif)
If I were you I'd throw some skinnies on the front and adjust the suspension for the drag strip.
Trending Topics
#8
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
i just found a vid of my car racing a 240sx. he posted it on youtube but its a good shot of me too.
http://youtube.com/watch?v=_Go3wxE_PYE
does it sound like my clutch is slipping, its a brand new spec stage 3+ with about 600 miles on in, ( just broke it in) im launching at 6000 rpm and dumping it.
http://youtube.com/watch?v=_Go3wxE_PYE
does it sound like my clutch is slipping, its a brand new spec stage 3+ with about 600 miles on in, ( just broke it in) im launching at 6000 rpm and dumping it.
#9
On The Tree
Join Date: Aug 2005
Location: pharr, texas USA
Posts: 155
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
looking at your 60 foot your launching pretty good but your MPH is alittle on the low side. Just wait till the weather drops and you should see an 11 second pass.