new personal best stock bottom end!!!!!!
11-03-2007, 11:54 PM
#1
TECH Apprentice
Thread Starter
iTrader: (10)
Join Date: Nov 2002
Location: Saint Charles, MO
Posts: 317
Likes: 0
Received 0 Likes
on
0 Posts
new personal best stock bottom end!!!!!! 1.479 60
6.801 1/8
100.41 1/8 mph
10.69 1/4
128.55 1/4 mph
stock bottom end, LG g5x4 cam, Dart 225cc heads, GM intake , 750 Holley Carb, 3200 lb race weight!!!
6.801 1/8
100.41 1/8 mph
10.69 1/4
128.55 1/4 mph
stock bottom end, LG g5x4 cam, Dart 225cc heads, GM intake , 750 Holley Carb, 3200 lb race weight!!!
11-04-2007, 01:30 PM
#6
TECH Apprentice
Thread Starter
iTrader: (10)
Join Date: Nov 2002
Location: Saint Charles, MO
Posts: 317
Likes: 0
Received 0 Likes
on
0 Posts
yeah it is all motor
ill try to get some pics of the setup on the web all i have are old shots of when it had a 4 barrel tb on a vic jr intake (when it was still fuel injected). now it has a gm performance parts intake, an old holley 750, with the msd ignition setup for ls1's minus the high rent coil packs.
it has been running low 11's for awhile but i finally switched out the converter and it stepped up big time. it is a really low dollar setup. i spun a bearing in the oe motor so i put in a 01 block i had out of a ta from work ( i paid the $300 core for it ...piston slap my ***) stock rockers, hardned push rods, asp pulley, elec. water pump, and i run it on 100 oct low lead aka av gas
ill try to get some pics of the setup on the web all i have are old shots of when it had a 4 barrel tb on a vic jr intake (when it was still fuel injected). now it has a gm performance parts intake, an old holley 750, with the msd ignition setup for ls1's minus the high rent coil packs.
it has been running low 11's for awhile but i finally switched out the converter and it stepped up big time. it is a really low dollar setup. i spun a bearing in the oe motor so i put in a 01 block i had out of a ta from work ( i paid the $300 core for it ...piston slap my ***) stock rockers, hardned push rods, asp pulley, elec. water pump, and i run it on 100 oct low lead aka av gas
Trending Topics
11-04-2007, 06:27 PM
#10
TECH Apprentice
Thread Starter
iTrader: (10)
Join Date: Nov 2002
Location: Saint Charles, MO
Posts: 317
Likes: 0
Received 0 Likes
on
0 Posts
http://smg.photobucket.com/albums/v7...nt=1069run.flv
i like the low lead so i can read the plugs better it is too hard to read on unleaded. i dont mind the questions.
i like the low lead so i can read the plugs better it is too hard to read on unleaded. i dont mind the questions.
11-10-2007, 07:54 PM
#18
TECH Apprentice
Thread Starter
iTrader: (10)
Join Date: Nov 2002
Location: Saint Charles, MO
Posts: 317
Likes: 0
Received 0 Likes
on
0 Posts
im not sure about anything on the wheels i took em off my roommates car that is sitting with no motor.. hehe
its a 4500stall nitrous converter we had laying around. i wish i could have ran it with a bigger one made for the setup
and the raceweight is 3200
its a 4500stall nitrous converter we had laying around. i wish i could have ran it with a bigger one made for the setup
and the raceweight is 3200
11-10-2007, 10:06 PM
#19
10 Second Club
iTrader: (35)
Join Date: Feb 2005
Location: Indiana boy
Posts: 4,174
Likes: 0
Received 0 Likes
on
0 Posts
Makes me feel good about this 93 coupe I just bought. It's a LS1/th400 car with a victor jr/750 demon, TSP 243's and a T-rex cam. The converter I have is a TCS 4000 with the ballooning plates. I'm hoping it'll stall around 4500 on a 150 shot. Car weighs around 2650 right now with no cage. I will be putting one in it by late spring.
