who says a 224 cam cant go fast
11-11-2007, 04:12 PM
#1
who says a 224 cam cant go fast 224/228, ported heads, 150 shot about 3000-3100 race weight
2000 DA
60- 1.486
330- 4.275
1/8- 6.626 @ 104.25
1000- 8.67
1/4- 10.406 @ 129.58
and for laughs my corrected times with the 2000 DA comes out to a 10.16 @ 132.59
2000 DA
60- 1.486
330- 4.275
1/8- 6.626 @ 104.25
1000- 8.67
1/4- 10.406 @ 129.58
and for laughs my corrected times with the 2000 DA comes out to a 10.16 @ 132.59
Trending Topics
11-12-2007, 11:32 PM
#9
and a properly built 400 is one thing. I'm not even 21 and this is my first tranny I built that had to be put to a real test. It could blow up tomorrow and I wouldnt care. Knowing that i built it and I will learn more from it is everything.
11-13-2007, 06:22 PM
#12
TECH Apprentice
iTrader: (5)
Join Date: Jun 2002
Location: Dallas, TX
Posts: 397
Likes: 0
Received 0 Likes
on
0 Posts
I would think there would be someone faster but you never know. I hold the fastest stock longblock (stock heads and stock cam) with spray record with just bolt-ons, a TH-400, 12-bolt, all suspension and a 3300lb raceweight. The fastest it went on a 200 shot was
6.49 @ 105 in the 1/8th and 10.28 @ 127 in the 1/4...this was with a 1.41 60'
Get some better weather and it'll definitly be in the low 10's
6.49 @ 105 in the 1/8th and 10.28 @ 127 in the 1/4...this was with a 1.41 60'
Get some better weather and it'll definitly be in the low 10's
11-14-2007, 10:41 PM
#13
10 Second Club
iTrader: (5)
Join Date: Jan 2003
Location: Fort Worth, TX
Posts: 1,455
Likes: 0
Received 0 Likes
on
0 Posts
11-15-2007, 06:10 AM
#14
7 Second Club
iTrader: (5)
Join Date: Nov 2001
Location: Gainesville, Florida # of drag strips runs: ?!?!?
Posts: 8,834
Likes: 0
Received 1 Like
on
1 Post
Congrats, nice pass!
I agree on correcting a nitrous run for the DA since nitrous seems to work better when the air is warmer versus cold days. Only one way to find out though....
Derek
I agree on correcting a nitrous run for the DA since nitrous seems to work better when the air is warmer versus cold days. Only one way to find out though....
Derek
11-15-2007, 10:01 AM
#17
Launching!
iTrader: (37)
Join Date: Nov 2007
Location: Finger TN.
Posts: 280
Likes: 0
Received 0 Likes
on
0 Posts
Fast! Hey guys, Not bad times at all! Ive got a LQ9 motor in my truck with a 212 224 SLP cam and matcing springs and retainers, Headers and a carb setup It runs consistant low 6.30s and dips into the 20s pretty regular at 3420# thats on a 225 shot and 275 drag radials.. Thats not bad is it???
