trapping @ 130 m.p.h still can't hook
10-18-2008, 02:29 PM
#1
10 Second Club
Thread Starter
iTrader: (3)
Join Date: Mar 2007
Posts: 183
Likes: 0
Received 0 Likes
on
0 Posts
trapping @ 130 m.p.h still can't hook I am making enough power for a mid to low 10 sec. pass but can't get the car off the line with a dead hook. It's a heads/cam/ nitrous car. I am running a midwest 9 rear with relo brackets in lowest hole,lower adj. control arms, short tq arm set @ -2. Strange single adjustables and springs up front and this time a new set of slicks. On motor it will dead hook with a high 1.6 60 ft. but when I spray, it still spins, sometimes through the 60 ft. I am still running stock shocks and springs in the rear. I feel like I am missing something little, I am not to familiar with instant center and the front torque arm mount. Any advice would be greatly appreciated.
10-18-2008, 05:53 PM
#5
10 Second Club
Thread Starter
iTrader: (3)
Join Date: Mar 2007
Posts: 183
Likes: 0
Received 0 Likes
on
0 Posts
Soft wall, tried psi from 15 to 11. A4 with a yank ss4000. Footbraking to about 2800 and going to the floor, nitrous off the line. I did a search and read about instant center, I have my front tq arm mount in the second to bottom hole, angle set at -2, lca's in the bottom of the relo. brackets. Car weighs 3650 with me in it and the calculator says I'm making like 625 at the wheels to go 130mph at this weight.
