Camaro396

iTrader: (14)

Thanks, hopefully I can go some 1.8s with this setup.

SweeTbone

iTrader: (8)

Be sure to let me know when you're going to Milan or Norwalk. I defintely want to be there to see what the heap will do. Hope to have my clutch ordered and installed before then so I can grenade my rear and get towed home.

Camaro396

iTrader: (14)

Im surprised you havn't bought a 9" yet. You need a 9" some slicks and skinnies on that thing, and a new clutch, so we can take it to the track and see what it does!

Irocss85

iTrader: (1)

cool looking car. and house (mines almost exactly the same looking, only 3br version). too bad for the flag hangin off the garage though ruining all that. lol. just teasin, who the hell am I to talk right now. 3-9? sheesh.

Roller406Bu

iTrader: (1)

what springs are you running in the front and rear did i miss that somewhere??

SweeTbone

iTrader: (8)

Well, my parents don't fund my racecar , so the 9" is still a good year or two off. I'll catch up to you and Trigger one day. But seriously I was thinking about some ET Streets on some beatdick 16 x 8 stockers. I just bought some Adj. LCAs so I'll throw those on and see what happens. Sorry to say that if the 10 bolt blows I'll be sitting idle for a few months to say the least.

Camaro396

iTrader: (14)

Thanks! Our house is also the 3bed 3 bath version.

Camaro396

iTrader: (14)

Stock all around. Im going to take the spring isolator out of the rear to drop it down a bit, and run QA1s in the front.

trigger1

iTrader: (28)

Which spring with your qa1?

Camaro396

iTrader: (14)

LS1 Z28 2002

the car looks great and awesome

i give u 10/10

nice work man

crzytown69

iTrader: (17)

NICE keep us posted

Camaro396

iTrader: (14)

kmracer

iTrader: (1)

are you going to run a carb throttle body on that or an elbow?

JL ws-6

iTrader: (50)

I need that intake.

Camaro396

iTrader: (14)

Im going to run a fab aluminum elbow and a Nick Williams 92mm TB.

Camaro396

iTrader: (14)

They're not that expensive. I can't remember what we sell them for retail at the shop.. I think maybe 399.99 for the intake & fuel rail kit all as one. The intake itself is cheaper, without the rails. Its a nice piece.

kmracer

iTrader: (1)

is it even possible to run a carb TB with a stock ecu? just S/D tune it? because from what i hear they're worth quite a bit of power on the top end, but i rarely see people running them.

Camaro396

iTrader: (14)

I'm not too sure. I'd imagine you could, just Speed Density tune it.

kmracer

iTrader: (1)

cool, good to know.