-----reviews on this seat!!!!
Thread Starter
TECH Senior Member
iTrader: (71)
Joined: Jul 2007
Posts: 11,088
Likes: 2
From: Winchester, TN
-----reviews on this seat!!!! anyone who has bought this seat tell me what you think..
http://www.jegs.com/i/JEGS/555/70256/10002/-1
WEIGHT!!
comfortable
what else do i need to mount them in my car
quality
anything else you can think of...
thanks!
http://www.jegs.com/i/JEGS/555/70256/10002/-1
WEIGHT!!
comfortable
what else do i need to mount them in my car
quality
anything else you can think of...
thanks!
Thread Starter
TECH Senior Member
iTrader: (71)
Joined: Jul 2007
Posts: 11,088
Likes: 2
From: Winchester, TN
im not too worried about the looks of them really.. car is nearing a drag car status, and i have 5% tint.. so no one will really see them, and if they do.. i dont care..
i can get both for cheaper than i can get one kirkey..
just wanting to know mainly how lite they are, comfortable, or anything like that..
thanks for input of course though!!!
Thread Starter
TECH Senior Member
iTrader: (71)
Joined: Jul 2007
Posts: 11,088
Likes: 2
From: Winchester, TN
do you know what they weigh?
outright weight, compared to kirkeys, compared to stock..
just wanting to know if its a good deal, or i should go with kirkeys.. mainly depending on the weight..
thanks a lot!
I cant give you a specific weight, but I would say the kirkey actually weights more. I used to have the plastic ones in my jeep, and they didn't weight ****. But those seats also were pretty uncomfortable. I dreaded driving over 20-30 miles at a time. I would spend the money and get kirkeys.
And i liked my plastic seats without covers. Easier to clean mud off
And i liked my plastic seats without covers. Easier to clean mud off
Trending Topics
I don't have the jegs ones, but I have a set similar in my BBC camaro, and they are not too bad. They look ALOT better WITH covers, and are alot more comfortable with the covers on.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo Thread Starter
TECH Senior Member
iTrader: (71)
Joined: Jul 2007
Posts: 11,088
Likes: 2
From: Winchester, TN
I cant give you a specific weight, but I would say the kirkey actually weights more. I used to have the plastic ones in my jeep, and they didn't weight ****. But those seats also were pretty uncomfortable. I dreaded driving over 20-30 miles at a time. I would spend the money and get kirkeys.
And i liked my plastic seats without covers. Easier to clean mud off
And i liked my plastic seats without covers. Easier to clean mud off
im not really worried about driving over 20-30 miles.. i rarely drive that far.. work is about 15 miles away, and other than that my town is relatively small.. i dont have a car that you exactly take on a road trip.. so the seats arent going to make it that much worse..
thanks for the replies guys.. keep them coming..
For drag cars they are not all that bad. For a D/D street car, I'd stay with the stockers.
I've had mine for 4 years. No problems. I have the cover. Doesn't look all that bad and comfortable (1/4 mile at a time and only occasionally on the street).
David
I've had mine for 4 years. No problems. I have the cover. Doesn't look all that bad and comfortable (1/4 mile at a time and only occasionally on the street).
David
Thread Starter
TECH Senior Member
iTrader: (71)
Joined: Jul 2007
Posts: 11,088
Likes: 2
From: Winchester, TN
Thread Starter
TECH Senior Member
iTrader: (71)
Joined: Jul 2007
Posts: 11,088
Likes: 2
From: Winchester, TN
no biggie, thanks for the input..