Speedfreaks101

Does anyone have any experience with the Jegs torque arm? Hows it built quality wise? Any problems?

Here are some pics
http://www.jegs.com//cgi-bin/ncommer...41&prmenbr=361


Tell me what you think

BTL FED

iTrader: (9)

It looks real similar to the alston t/a that a few people are running without any problems, bit the pinion angle is not adjustable with the jegs and the alston is about twice the price

Magnus

iTrader: (4)

I use the MAC torque arm which is VERY similar to the jegs. The only difference that I see is that the MAC torque arm has a drive shaft loop.

It's a VERY stout piece and I like it a lot.

Pro Stock John

iTrader: (34)

How much did Mike @ Alston quote you on price 00Red, He said likd <400 on the phone to me on Friday.

I would not bother with a torque arm unless it was adjustable.

BTL FED

iTrader: (9)

I was just looking at there website and it shows 595.00

The Guy in MY 99TA

I'm thinking about the Spohn torque arm. So far I like the design of it the best.

Josh S.

Full-Force

iTrader: (11)

jegs has the adjustable one just like that for about 50 more bucks

LS1_PNYTAMR

iTrader: (1)

YEAP 304$ for an adjustable tunnel mount tq arm that wont get in the way of ur duals.. i have two buddy's that are and were 60fting really low and running really quick on this tq arm and seem to love it.. if u dont get the jegs, go with one that mounts the same way.

Slow 346

iTrader: (33)

I have the Jegs one on my car. No problems at all cutting low 1.3 60 fts.

jswhite

iTrader: (1)

It won't work with a Moser 9".

NOTFAST

iTrader: (10)

I just picked up what I think is the JEGS TA...maybe its mac...it has a DS loop and mounts to the tunnel with 6 bolts on each side

Paid $50 so I'm liking it so far.

Slow 346

iTrader: (33)

worked fine with my Moser 9".

02SOMWS6

iTrader: (6)

It worked with my currie 9"

tim99ws6

iTrader: (31)

why wont the jegster work with the moser 9"???(sorry to bring up a dead thread)

kp

iTrader: (34)

A moser 9" moves the torque arm very far to the left, I had a jegster and it was on too much of an angle - didnt even try putting it on and sent it back. They may have changed the mounting bracket since, the one I tried wasnt even close with a 9" moser a couple years ago.