1.42 60ft on back tires (my wheelstand video)
#1
TECH Resident
Thread Starter
iTrader: (8)
Join Date: Nov 2001
Location: Stafford TX
Posts: 878
Likes: 0
Received 0 Likes
on
0 Posts
1.42 60ft on back tires (my wheelstand video)
This is one of the videos of my car last Fri. night. I have another one that looks alot better, i will try and post it later.
http://www.ghettosledracing.com/vide...id/fast98z.wmv
__________________
Mike @ MTI
'98 NBM Z-28 A3
MTI S2 5.3l Truck Heads, C1 cam, Hooker LT's, 3"y-pipe, SLP Loudmouth, Pulley, Ronnie Doris built TH350, Circle D Specialties N2o Convertor, 10 bolt w/3.23's, TNT/NOS/NX.STOCK SHORTBLOCK
http://www.ghettosledracing.com/vide...id/fast98z.wmv
__________________
Mike @ MTI
'98 NBM Z-28 A3
MTI S2 5.3l Truck Heads, C1 cam, Hooker LT's, 3"y-pipe, SLP Loudmouth, Pulley, Ronnie Doris built TH350, Circle D Specialties N2o Convertor, 10 bolt w/3.23's, TNT/NOS/NX.STOCK SHORTBLOCK
Last edited by Camaroholic; 12-24-2003 at 06:17 PM.
Trending Topics
#17
TECH Resident
Thread Starter
iTrader: (8)
Join Date: Nov 2001
Location: Stafford TX
Posts: 878
Likes: 0
Received 0 Likes
on
0 Posts
Thanks everyone. Nothing broke when it came down, the front QA1's were set on 4 and it scraped the FACTORY K-MEMBER a little bit. This was not on the 10 bolt rear, it now has a 12 bolt/3.73 and it's not finishing the 1/4 on the N2o(listen to rev limiter at end). I can't say just yet what it ran because a select few locals want a piece of my little stock motored LS1. But I will tell everyone before I do build a motor. Even if I did say I don't know if anyone would believe me