New best NA and first nitrous pass...
#1
7 Second Club
Thread Starter
iTrader: (5)
Join Date: Nov 2001
Location: Gainesville, Florida # of drag strips runs: ?!?!?
Posts: 8,834
Likes: 0
Received 1 Like
on
1 Post
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Track was packed today! They opened the gates early, and it took me 40 minutes to get through tech. First 3 runs were made on motor, and also the first time I've run the car since installing the disc brakes, 5-point rollbar and ram air, and I'd also gone to 28 x 9 ET streets from 26 x 10, so all I was hoping for was 11.50s since my previous best was 11.519. Air wasn't bad (low 50s and 40-50% humidity)
Well 1st pass:
60 - 1.626 (slightly spinning)
330 - 4.712
1/8 - 7.332
mph - 93.65
1000 - 9.606
1/4 - 11.538
mph - 116.17
Followed that with a new NA best:
60 - 1.613 (better hook)
330 - 4.693
1/8 - 7.310
mph - 93.63
1000 - 9.582
1/4 - 11.512
mph - 116.29
Then an 11.544 at 116.12 pass.
After debating it, I decided to crack the bottle open and see if I could break the 10s on a 100 hp shot.
First run, car spun and went for the center line, so I short-shifted 1st-2nd gear and got a:
60 - 1.603
330 - 4.563
1/8 - 7.051
mph - 98.86
1000 - 9.197
1/4 - 11.019![Bang Head](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_banghead.gif)
mph - 123.20
Damnit!
Then I wait for a time run for almost 2 hours, now it's 4:15 (started running at 10:45) and got:
60 - 1.588
330 - 4.473
1/8 - 6.939
mph - 99.23
1000 - 9.068
1/4 - 10.889![Headbang](https://ls1tech.com/forums/images/smilies2/headbang.gif)
mph - 122.03
Finally got a 10 second pass, and the car was still spinning! Thinking about trying some rancho adjustable shocks instead of my current comp engineering drag shocks.
GeorgeC was there and hopefully he'll have some video posted soon of 2 runs I made.
Sorry so long, but at least my racing season started out good!![Grin](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_grin.gif)
Derek
Well 1st pass:
60 - 1.626 (slightly spinning)
330 - 4.712
1/8 - 7.332
mph - 93.65
1000 - 9.606
1/4 - 11.538
mph - 116.17
Followed that with a new NA best:
60 - 1.613 (better hook)
330 - 4.693
1/8 - 7.310
mph - 93.63
1000 - 9.582
1/4 - 11.512
![Nod](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_nod.gif)
mph - 116.29
Then an 11.544 at 116.12 pass.
After debating it, I decided to crack the bottle open and see if I could break the 10s on a 100 hp shot.
First run, car spun and went for the center line, so I short-shifted 1st-2nd gear and got a:
60 - 1.603
330 - 4.563
1/8 - 7.051
mph - 98.86
1000 - 9.197
1/4 - 11.019
![Bang Head](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_banghead.gif)
mph - 123.20
Damnit!
Then I wait for a time run for almost 2 hours, now it's 4:15 (started running at 10:45) and got:
60 - 1.588
330 - 4.473
1/8 - 6.939
mph - 99.23
1000 - 9.068
1/4 - 10.889
![Headbang](https://ls1tech.com/forums/images/smilies2/headbang.gif)
mph - 122.03
Finally got a 10 second pass, and the car was still spinning! Thinking about trying some rancho adjustable shocks instead of my current comp engineering drag shocks.
GeorgeC was there and hopefully he'll have some video posted soon of 2 runs I made.
Sorry so long, but at least my racing season started out good!
![Grin](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_grin.gif)
Derek
Last edited by Villain281H; 01-24-2004 at 06:00 PM.
Trending Topics
#8
7 Second Club
Thread Starter
iTrader: (5)
Join Date: Nov 2001
Location: Gainesville, Florida # of drag strips runs: ?!?!?
Posts: 8,834
Likes: 0
Received 1 Like
on
1 Post
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Thanks for all the comments ![Grin](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_grin.gif)
tally-nice meeting you too Brian! Hope some 11s are in your future, plus a stronger rear-end (or a trailer) :jest
86-good to hear from ya B! Was wondering where you were, are you going to try and make an appearance soon? How's the new job going...
Derek
![Grin](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_grin.gif)
tally-nice meeting you too Brian! Hope some 11s are in your future, plus a stronger rear-end (or a trailer) :jest
86-good to hear from ya B! Was wondering where you were, are you going to try and make an appearance soon? How's the new job going...
Derek
#10
10 Second Club
iTrader: (14)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by Villain281H
Thanks for all the comments ![Grin](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_grin.gif)
tally-nice meeting you too Brian! Hope some 11s are in your future, plus a stronger rear-end (or a trailer) :jest
86-good to hear from ya B! Was wondering where you were, are you going to try and make an appearance soon? How's the new job going...
Derek
![Grin](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_grin.gif)
tally-nice meeting you too Brian! Hope some 11s are in your future, plus a stronger rear-end (or a trailer) :jest
86-good to hear from ya B! Was wondering where you were, are you going to try and make an appearance soon? How's the new job going...
Derek
I get my liscense back the middle of Febuary, so I'll be planning a trip up there as soon as the 86' is all sorted out. I'm shooting for March - April realistically.
![Burnout](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_burnout.gif)
#11
TECH Junkie
Join Date: Nov 2001
Location: Melbourne, FL
Posts: 3,987
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Derek, I've only got one of the videos done so far... It's the NA pass. The link to it is... http://www.coffeyracing.com/media/derek_1.wmv. Right click on the link and choose "Save As..."
I even put up one of my old farm truck as well, which is at http://www.coffeyracing.com/media/farmtruck.wmv. Again, right click and save as...
I'll get the N2O video up sometime later... I guess I should've stuck around for the 10 second pass.
Congrats!!!!!
I even put up one of my old farm truck as well, which is at http://www.coffeyracing.com/media/farmtruck.wmv. Again, right click and save as...
I'll get the N2O video up sometime later... I guess I should've stuck around for the 10 second pass.
![Embarassed](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_emb.gif)
![Grin](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_grin.gif)
#12
7 Second Club
Thread Starter
iTrader: (5)
Join Date: Nov 2001
Location: Gainesville, Florida # of drag strips runs: ?!?!?
Posts: 8,834
Likes: 0
Received 1 Like
on
1 Post
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
thank you Catfish!
![Hail](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_hail.gif)
Shame I couldn't have taped your 12.99 pass, and same for my 10.88 pass. I would have left too had my car done the deed on the first nitrous attempt, took until 3:45 to make the 2nd pass!
![Hail](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_hail.gif)
![Hail](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_hail.gif)
![Hail](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_hail.gif)
Shame I couldn't have taped your 12.99 pass, and same for my 10.88 pass. I would have left too had my car done the deed on the first nitrous attempt, took until 3:45 to make the 2nd pass!
Last edited by Villain281H; 01-26-2004 at 05:25 PM.
#14
7 Second Club
Thread Starter
iTrader: (5)
Join Date: Nov 2001
Location: Gainesville, Florida # of drag strips runs: ?!?!?
Posts: 8,834
Likes: 0
Received 1 Like
on
1 Post
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Coach,
the spray is just for kicks, I usually don't use it for bracket racing.
FYI, on the LED bulbs Gainesville now has in the tree, on my three NA runs I cut .011, .015, .016 bulbs
I'm ready for the season to start as far as reaction times, but still need to do some tuning with the suspension.
How's the hot rod doing?
the spray is just for kicks, I usually don't use it for bracket racing.
FYI, on the LED bulbs Gainesville now has in the tree, on my three NA runs I cut .011, .015, .016 bulbs
![Grin](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_grin.gif)
How's the hot rod doing?
#16
"The Drag Racing Director"
iTrader: (10)
![Wink](https://ls1tech.com/forums/images/icons/icon12.gif)
Originally Posted by Villain281H
Coach,
the spray is just for kicks, I usually don't use it for bracket racing.
FYI, on the LED bulbs Gainesville now has in the tree, on my three NA runs I cut .011, .015, .016 bulbs
I'm ready for the season to start as far as reaction times, but still need to do some tuning with the suspension.
How's the hot rod doing?
the spray is just for kicks, I usually don't use it for bracket racing.
FYI, on the LED bulbs Gainesville now has in the tree, on my three NA runs I cut .011, .015, .016 bulbs
![Grin](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_grin.gif)
How's the hot rod doing?
![Mr. Cool](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_cool.gif)
![Devil](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_devil.gif)
Your reaction times are right on the money.
![Hail](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_hail.gif)
Coach