Proud to introduce our new F-body fuel cells!
#24
FormerVendor
Thread Starter
iTrader: (19)
Join Date: Nov 2010
Location: Lakeway, Tx
Posts: 423
Likes: 0
Received 0 Likes
on
0 Posts
Smaller in what dimension? I could cut the length in half and get you 7.5 gallons. Everything else would remain the same. That way we could carry two sizes as the standards. Ill get pricing worked out for that size asap
Last edited by Motovative; 03-01-2011 at 07:36 PM.
#25
9 Second Club
iTrader: (2)
Very nice work!!
What I would love to see is a 5 gal. fuel cell that you can fill up from the factory location and is located over on the driver's side which will allow room for the installation of some wheelie bars on an F-body! I am not too crazy about pouring fuel from a can into the opening of a fuel cell while holding the can over the hatch area.
I maybe dreaming though.
N2
What I would love to see is a 5 gal. fuel cell that you can fill up from the factory location and is located over on the driver's side which will allow room for the installation of some wheelie bars on an F-body! I am not too crazy about pouring fuel from a can into the opening of a fuel cell while holding the can over the hatch area.
I maybe dreaming though.
N2
#38
TECH Enthusiast
iTrader: (5)
Join Date: Apr 2008
Location: Hemet
Posts: 663
Likes: 0
Received 0 Likes
on
0 Posts
Plastic weighs less than aluminum likely but if you have ever replaced your own fuel pump something like this would make things a lot easier. Does the stock fuel level sender work with the cell?