Need pics of pin on firebird hood mounts please!
#21
9 Second Club
Join Date: Dec 2007
Location: Eagle River, Alaska
Posts: 342
Likes: 0
Received 0 Likes
on
0 Posts
Yeah. I was expecting to pick up pieces. But as I came back on the return lane the safety guy was carrying one big piece. Being a full lift off it barely grazed the windhield and didn't hurt anything else, so I just strapped it down on there and drove home.
In those pics you can see just some stress cracks. VFN makes one strong *** hoods.
In those pics you can see just some stress cracks. VFN makes one strong *** hoods.
#24
9 Second Club
Join Date: Dec 2007
Location: Eagle River, Alaska
Posts: 342
Likes: 0
Received 0 Likes
on
0 Posts
My original lock pin vibrated loose and flew off somewhere. Then I put a different one on. Well the video shows what happened to that pin. So I drilled a hole through the stud and put that gold lock pin on there and I hope that will hold everything on. lol That's just black electrical tape around the hole to keep it from getting scratched. I have some clear paint protector film i'll get around to putting there at some point.
#32
9 Second Club
Join Date: Dec 2007
Location: Eagle River, Alaska
Posts: 342
Likes: 0
Received 0 Likes
on
0 Posts
I used 1/8 by 1/2 long rivits to go the the fenders with small washers on the bottom. You may want to go a little longer because mine barely caught the washers.
#39
10 Second Club
iTrader: (11)
Join Date: Apr 2009
Location: Lake of the Ozarks, MO
Posts: 2,283
Likes: 0
Received 1 Like
on
1 Post
Sorry to dig up an old thread but I cant find any good pictures or good looking ways to pin the front? Im looking to get this hood and plan on getting a set of Camaro Rails and making them fit, but what about the front?? I want it clean and nice looking..