9" aluminum or cast iron case ?
9" aluminum or cast iron case ? I bought a bukart 9", But to finish it. I have to get the senter section, and wanth to buy the aluminum case. But has any body run accross any problems with those ?
I have a Moser bolt through aluminum. It's a good choice and I would recommend it over the standard Strange aluminum center. I have seen these run in 2000 hp cars. If you want the best go with the Strange Super Case.
I had my MWC built with an aluminum center and drove on the street with just under 500 rwhp to it for a few years with no trouble, now I have a race car with a 40 spline and aluminum. Thats the only way id go.
Trending Topics
There are plenty of people that have run Strange aluminum 9"center sections on the street and the track without issues.
The Strange aluminum case is much stronger than the stock Ford nodular iron case but not as strong as the Strange nodular iron. The aluminum case is 20 lbs lighter than the iron.
I would enjoy providing a quote for the Strange Eng case and internals of Your choice. Please call or message. We are open 7 days a week!
Thank You,
Carl
The Strange aluminum case is much stronger than the stock Ford nodular iron case but not as strong as the Strange nodular iron. The aluminum case is 20 lbs lighter than the iron.
I would enjoy providing a quote for the Strange Eng case and internals of Your choice. Please call or message. We are open 7 days a week!
Thank You,
Carl
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
I got 40 spline axles, its just going to see track times. I dyno 500 rwhp on my old setup, now I have a new set up. And most likely will dyno another 50rwhp on motor plus a 200 to 300 shot.
I wanted to get a moser aluminum unit, but werent sure if anyone had any issues.
If anyone has something to offer just send me a private message with specs and a price. thanks
I wanted to get a moser aluminum unit, but werent sure if anyone had any issues.
If anyone has something to offer just send me a private message with specs and a price. thanks
I'm running 35 spline gun drilled, spool, with the daytona pinion. Motor is carbed LS3 on nitrous. Car is pretty much racecar, but I won't own a car that I can't drive on the street. It will see plenty of street miles this summer.
