is this a good Proportioning Valve for abs delete?
Thread Starter
TECH Senior Member
iTrader: (10)
Joined: May 2005
Posts: 5,353
Likes: 2
From: Bossier city,LA barksdale AFB
is this a good Proportioning Valve for abs delete? couldnt get any help in braking section
http://www.jegs.com/i/JEGS-Performan...oductId=755192
i know everyone uses the willwood ones but this looks better
http://www.jegs.com/i/JEGS-Performan...oductId=755192
i know everyone uses the willwood ones but this looks better
looks like a nice little piece... the whole purpose of a prop valve is to control the amount of fluid to the rears so IMO they are all pretty generic really.. I might actually get the same one.. it looks smaller than the wilwood and its already black which is what I want
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Thread Starter
TECH Senior Member
iTrader: (10)
Joined: May 2005
Posts: 5,353
Likes: 2
From: Bossier city,LA barksdale AFB
im going to do something different. might hide everything behind or under the headlight. dont no yet we will see. maybe something like this as far as where the lines would go
if i had my motor out it would all be hidden under brake booster
if i had my motor out it would all be hidden under brake booster
Last edited by SIC LSX; May 14, 2011 at 05:17 PM.
Thread Starter
TECH Senior Member
iTrader: (10)
Joined: May 2005
Posts: 5,353
Likes: 2
From: Bossier city,LA barksdale AFB
lol yeah! ive been driving with skinnys/fattys for over 2 years and spool for 6-8 months now. You get people that have never done it and just read on the net are the ones that get it in your head and scare people ohhhhh thats bad u can do that on street. My car is my 100%DD. I will say it again i have drove snow, ice, crazy storms, you name it. never had trouble. had a wreck in front of me in hard rain i hit the brake and the air damn was dragging the car was stopping so good. You cant be dumb if your siding and your on the brakes you cant turn so pump the brakes if u want to turn. Thats all abs is if for those people that cant drive.
there is plenty of room under the clutch master reservoir for both of those.. just take the inner wheel well off the driver side and drill through there and you'll be fine.. I'm probably going to use those art n crafts pipe cleaners to get my lines laid out and go from there.. shouldn't be too hard at all just tedious