347 build (lots of pics)
#1
Teching In
Thread Starter
Join Date: Sep 2008
Location: texarkana
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
347 build (lots of pics)
Well guys I stacked a rod bearing so now its on to better things i haven't had a computer for awhile so havent gotten on ls1tech lately ,but now i got one so here is the update, i took the block to the machine shop today to have the block decked and o-ringed, purchased the prc 2.5 stage 317 heads from TSP today.pics coming soon
#4
Teching In
Thread Starter
Join Date: Sep 2008
Location: texarkana
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
to duffster theres the link, had to figure out how to upload pics still not sure on how to upload them directly to the thread ,help would be appreciated to streetsilverado dont hate me because you dont have a street car no more just joking i know you will end up getting you another f-body hopefully soon need somebody to help me come up with new racing secrets
#5
11 Second Club
iTrader: (103)
Join Date: Aug 2005
Location: South of West Point Iowa
Posts: 2,633
Likes: 0
Received 1 Like
on
1 Post
in your folders for the pictures on photobucket, you'll see 4 bars of text that resembles the address for the picture... copy the one with the [ img ] pic address [/ img ]
#6
Teching In
Thread Starter
Join Date: Sep 2008
Location: texarkana
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
Bare BlockBlockBlock with crank still in itHeads and intake offPistons dont look to bad at all for spraying probably 150 bottles of nitrous on them a 150 shotSpun Bearing
Trending Topics
#9
Teching In
Thread Starter
Join Date: Sep 2008
Location: texarkana
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
Yea she was pretty dirty,definetly needed a bath,didn't have any oil leaks though and had 109,000 on it I was very impressed the stock piston can take so much abuse, I now believe a 200 shot frequently would not be a problem on them, with the right tune of course Ya i have to agree the bearing was shot and the rest of the journals had some scoring on them also,defiently was ran on low oil
#12
Teching In
Thread Starter
Join Date: Sep 2008
Location: texarkana
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
Just a little update, I have decied to go with a callies stock stroke crank with a 2" journal, callies I-beam rods, and diamond custom pistons, all good for about 26 psi of boost bulletproofing the short block Block should be decked and o-ringed by next week when i get back from work,will be taking it to chuck to torque plate hone it and clean it up, heads should also be in taking them to david to groove them for the o-ring
#15
Teching In
Thread Starter
Join Date: Sep 2008
Location: texarkana
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
she's empty
gave her a bath
cleaned one of the pistons so you can get a better look at it, still shocked at how sexy it still looks
heres the rearend that is finally going to get put to good use
gave her a bath
cleaned one of the pistons so you can get a better look at it, still shocked at how sexy it still looks
heres the rearend that is finally going to get put to good use
#16
Teching In
Thread Starter
Join Date: Sep 2008
Location: texarkana
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
PIC UPDATE got my new prc 2.5 stage 317 heads in today took them to david today to cut the reciever groove in them,still waiting on him to finish decking and o-ringing the block oh also sold my ss4000 stall and 4l60e transmission today,im going to go back 4l80e probably so i can keep the electronic shift
#20
Teching In
Thread Starter
Join Date: Sep 2008
Location: texarkana
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
sorry man been gone i work 7 days on 7 days off to answer the question probably will be spinning it on up there, im really trying to keep it hydraulic though so i can keep it where i can drive it on the street for the seven days that i have off work, and maybe even drive it to work