joblo1978

iTrader: (14)

Wow! 40 bucks? So this plus a moroso box equals 300 bucks for a battery relocation? That's crazy!

Jonathan@Tick

iTrader: (5)

I wish we could have kept the price as it was originally but after adding up our expense we were barely making enough profit to justify our time spent on the labor to make the cables with no profit on the parts at all... We also had no room to offer our normal dealer or military discounts.

This kit is a very nice kit that is as "bolt in" as it will get. Not only are you paying for the cable, lugs, switch, etc but you are also paying for all the time you will save vs. making your own kit.

We are working hard to keep up with the orders we already have and within a week or two we will have some custom heat shrink on the ends of the cable with our Tick logo. Little things like this have made the price go up, but the end result will be a nicer, more finished kit.

dreamls1

iTrader: (25)

OK, got the kit installed. Just cant figue out where i install the Ground wire on the PS of the block and the chassis? i have no bolt sticking out for put i nut on.

Jonathan@Tick

iTrader: (5)

The ground wire for the pass side should install to the block in the same location that the factory ground cable went using the factory bolt. On the chassis side, we include a nut which will attach the cable to the sway bar mount. There is a mount that bolts to the chassis which the sway bar would then bolt to. On one of those mounting bolts there should be enough bolt sticking through the bracket to simply use the supplied nut to attach our cable.

If you don't have a sway bar, you probably removed those brackets as well. Basically, you can mount your ground cables from the block to the chassis anywhere, just be sure the mounting points are free of paint.

dreamls1

iTrader: (25)

Thanks Jonathan, that's what I was wondering. Ya my sway bar is gone!

MurderedOut

iTrader: (21)

Any updates? Any install experience?

Looking to relocate my battery, its really just a street car and im wanting to relocate to clean up the engine bay even more. Would i be able to use this kit without the switch, with the BMR relo tray?

ss2000

iTrader: (45)

I read this whole thread, does this kit work with the box mounted in the t-top well without modification?

Jadedbird

iTrader: (27)

oh im ordering this thing!

MasterTomos

iTrader: (15)

+1 for dissapointment for no LT1 love

Looks like a nice kit though

joeZ96

iTrader: (3)

See post 27. Just give them a call.

https://ls1tech.com/forums/15198533-post27.html

Firebirdmuscle

iTrader: (16)

On your page it says for use only with dry cell batteries. Why is that? I'm wanting to relocate to the spare tire well but I don't want the kill switch near the taillights. I'd like to put it down at the license plate like a few others I've seen.

fastsspr

iTrader: (49)

subscribed

waterbug1999

iTrader: (3)

sucks all the pictures are all gone now that i put the battery in the back. Totally rewiring the car for everything and pics are a wonderful thing.

02ws666

iTrader: (1)

Anyway to get some pictures, TICK? I am on the fence.. Would like to see a finished product before jumping in.

waterbug1999

iTrader: (3)

Mines not competely done, but most of it is ran tho.

cancam99ss

iTrader: (8)

Id love to see more pics im looking to get a set and run my battery to the rear i already have the tray

zssman

iTrader: (9)

Anyone else have any input on this setup?