View Poll Results: Would the mentioned mods net an 11 second 1/4?
No sweat. All you need to do is stab and steer!!
7
63.64%
Can't be done for under 3k.. Better re-think your goal!!
2
18.18%
Take some parts off your list, but I added the ones I think you should use in a post below.
2
18.18%
Voters: 11. You may not vote on this poll
Mid 11's for under 3k?
Mid 11's for under 3k? I am trying to help him buy effective parts. I have a good knowledge what works but he's thrwing out ideas like a Holley intake, FIPK and other things that I think are 
Below is the list I have put together of go fast goodies. Any additions or subtractions welcome.
Car in question is a 2002 35th convertable WS6
Lid ($125)
Filter ($45)
Coated Pacesetter Headers (New $400ish)
Off road Y-pipe with Flowmaster collector ($175)
Cut out ($35)
TNT F1 ($670)
Bottle Heater ($120)
Harlan Window switch ($75)
Buy some stock 16" Z28 wheels ($100)
26" - 11.5 ET streets ($340)
Adjustable TQ arm ($320)
Rear contol arms ($120)
Subframe connectors ($200 Diamond style since it is a vert)
Total $2925 (No tax or shipping. We would be doing install on all parts).. Little over budget but, would this net 11's??
Below is the list I have put together of go fast goodies. Any additions or subtractions welcome.Car in question is a 2002 35th convertable WS6
Lid ($125)
Filter ($45)
Coated Pacesetter Headers (New $400ish)
Off road Y-pipe with Flowmaster collector ($175)
Cut out ($35)
TNT F1 ($670)
Bottle Heater ($120)
Harlan Window switch ($75)
Buy some stock 16" Z28 wheels ($100)
26" - 11.5 ET streets ($340)
Adjustable TQ arm ($320)
Rear contol arms ($120)
Subframe connectors ($200 Diamond style since it is a vert)
Total $2925 (No tax or shipping. We would be doing install on all parts).. Little over budget but, would this net 11's??
Yes it can be done. However, I'd just forget about using ET streets all together. I'd go with Nittos. Buying a few parts used to save cash towards a nitrous verter/tranny cooler couldn't hurt either.
Josh
Josh
TECH Enthusiast
Joined: Jul 2002
Posts: 611
Likes: 0
From: Austin, TX
Originally Posted by distortion_69
Yes it can be done. However, I'd just forget about using ET streets all together. I'd go with Nittos. Buying a few parts used to save cash towards a nitrous verter/tranny cooler couldn't hurt either.
Josh
Josh
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
I did this:
vigi 3200 converter with cooler = $750
Nittos = 300
TNT F1 kit on a GP (100 shot) = $475
lid = $125
Cutout = $30
I went 11.7@115 like that. Then I added MAC headers and went 11.6@123 on terrible run where it shifted to second early back down to first then finished out the run. This was back in 01.
vigi 3200 converter with cooler = $750
Nittos = 300
TNT F1 kit on a GP (100 shot) = $475
lid = $125
Cutout = $30
I went 11.7@115 like that. Then I added MAC headers and went 11.6@123 on terrible run where it shifted to second early back down to first then finished out the run. This was back in 01.
Staging Lane
Joined: Mar 2004
Posts: 54
Likes: 0
From: East Coast Kid
you guys go to the track often and run slicks/et streets consistantly on a stock 10 bolt with no probs ? most of the fbod people i know usually shy away from hard drag launching, especially on slicks on a stock rear end
but yea im jealous, its so easy for u guys to go 11's no sweat
but yea im jealous, its so easy for u guys to go 11's no sweat
11's are almost too easy, isn't that crazy!
i went 12.4 with the following
85mm lid
85mm maf
tci 3800 stall
FTRA
asp pulley
nittos.
That is it!
if i put a 100 shot on it i have mid 11's easy.
all mods with nos would total around 2 grand.
i went 12.4 with the following
85mm lid
85mm maf
tci 3800 stall
FTRA
asp pulley
nittos.
That is it!
if i put a 100 shot on it i have mid 11's easy.
all mods with nos would total around 2 grand.
I ruin the end of films...
iTrader: (2)
Joined: Nov 2002
Posts: 1,545
Likes: 0
From: Taking back some video tapes
Originally Posted by Chris ARE 360
4200 plus stall converter
headers/Ypipe/cutouts
slicks/skinnies
100 shot TNT wet kit
done
headers/Ypipe/cutouts
slicks/skinnies
100 shot TNT wet kit
done
Staging Lane
Joined: Mar 2004
Posts: 54
Likes: 0
From: East Coast Kid
Originally Posted by Got Me SOM
11's are almost too easy, isn't that crazy!
i went 12.4 with the following
85mm lid
85mm maf
tci 3800 stall
FTRA
asp pulley
nittos.
That is it!
if i put a 100 shot on it i have mid 11's easy.
all mods with nos would total around 2 grand.
i went 12.4 with the following
85mm lid
85mm maf
tci 3800 stall
FTRA
asp pulley
nittos.
That is it!
if i put a 100 shot on it i have mid 11's easy.
all mods with nos would total around 2 grand.
what was the trap on that 12.4? isn't a 3800 stall sorta big for ur setup
TECH Junkie
Joined: May 2003
Posts: 3,050
Likes: 0
From: its fucking cold
Originally Posted by Short Round
nice
what was the trap on that 12.4? isn't a 3800 stall sorta big for ur setup
what was the trap on that 12.4? isn't a 3800 stall sorta big for ur setup
"what? no way...he will need some real tires...invest in the et streets"
I was just saying, even though a 10 bolt is more likely to last longer in a a4 than an m6. I certainly wouldn't want to suggest something to him that could possibly leave him stranded at the track the first day Stick with BFGS or Nittos if your gonna do some hard launching off a convertor and spraying and want it to be reliable. Hell, you might even break it with Nittos.. eventually. Its an uncertainty, really. We have a local or two here who have made 20-30 passes on et streets with no problem. He only wants mid 11's, and with spray and bfgs and a verter that would be highly possible. Whatever floats his boat.. thats just my opinion. But as you can see, I have a 12 bolt 
Peace,
Josh
I was just saying, even though a 10 bolt is more likely to last longer in a a4 than an m6. I certainly wouldn't want to suggest something to him that could possibly leave him stranded at the track the first day
Stick with BFGS or Nittos if your gonna do some hard launching off a convertor and spraying and want it to be reliable. Hell, you might even break it with Nittos.. eventually. Its an uncertainty, really. We have a local or two here who have made 20-30 passes on et streets with no problem. He only wants mid 11's, and with spray and bfgs and a verter that would be highly possible. Whatever floats his boat.. thats just my opinion. But as you can see, I have a 12 bolt Peace,
Josh
Staging Lane
Joined: Mar 2004
Posts: 54
Likes: 0
From: East Coast Kid
Originally Posted by QwikFix
I wouldn't say a 3800 is big for his set up, he'd probably stand to gain a bit more if he went to a Yank 4400. I think it has been agreed that the yank 4200/4400 are the best 'verters for a SI setup.
im just a n00b, i ran a 00 ws6 with just lid and exhaust and he had a 3200 stall, i don't know what gears tho, and people were saying it was too big for him at that point...he got heads/cam afterwards, now people say its too small for him lol
so thats why i thought 3800 was "big" for a near stock motor
The 3800 isn't too big at all, drives great on the street. .Of course I could have went bigger but I didn't want a super loose high stall for the street. My car is not a drag race /max effort car, my converter is big enough to hit hard but not too big to run nitrous or blower. I will be doing the latter. 
1.68 60' with no suspension mods on nittos. a lot of people underrate this converter and I don't know why. If i had suspension and stickier tires I could do 1.5's I'm pretty confident about that.
1.68 60' with no suspension mods on nittos. a lot of people underrate this converter and I don't know why. If i had suspension and stickier tires I could do 1.5's I'm pretty confident about that.
TECH Resident
Joined: Nov 2001
Posts: 929
Likes: 0
From: NC
Take the money on the T/A and filter and put it to a 3200-3600 converter. With the torque of the nitrous, you don't need alot of converter, it will drive right through the converter and waste all your new found power. The tp4400 is a joke on the stock engine with nitrous, it stalls about 5-5200 and just doesn't work in my experience but a little more helps a bunch. With bolt ons, 100 shot,vig3200 and internal stock, I've gone 10.63. Thats at about 3300 raceweight also. DEFINATELY get the ET streets. You cant go 11's without hooking hard.
Lid
Filter
Hooker longtubes
Off road Y-pipe with Flowmaster collector
Cut out
TNT F1
Bottle Heater
Harlan Window switch
Intank fuel pump
16" wheels ($100)
26" - 10.5 ET streets ($340)
Rear contol arms ($120)
Subframe connectors ($200 Diamond style since it is a vert)
Vig 3200 or a <3600 stall
My friend back in 1999 went 11.45@116mph with all of that, plus skinnies, a roll bar and minimal weight reduction.
Filter
Hooker longtubes
Off road Y-pipe with Flowmaster collector
Cut out
TNT F1
Bottle Heater
Harlan Window switch
Intank fuel pump
16" wheels ($100)
26" - 10.5 ET streets ($340)
Rear contol arms ($120)
Subframe connectors ($200 Diamond style since it is a vert)
Vig 3200 or a <3600 stall
My friend back in 1999 went 11.45@116mph with all of that, plus skinnies, a roll bar and minimal weight reduction.