Drag Racing Tech
Sponsored by:
Sponsored by:

2inch drop spindels

Thread Tools
 
Search this Thread
 
Old 09-19-2011 | 07:15 PM
  #21  
joelster's Avatar
10 Second Club
 
Joined: Oct 2007
Posts: 2,630
Received 26 Likes on 17 Posts
Default

Originally Posted by SSPerformance
smurf car was stock spindles... something dose not sound right you should have at least 3in of travel with 2in drop spindles.
You were probably running a Moroso DS-2 with a 26 or 28" height. Me and Johnny run these little radials which are 25 and change.

John--get the stock size spindle. If you want to limit front end travel then run a limiter.
Old 09-19-2011 | 07:28 PM
  #22  
studderin's Avatar
Thread Starter
TECH Senior Member

iTrader: (28)
 
Joined: Nov 2005
Posts: 5,556
Likes: 0
Received 6 Likes on 6 Posts
From: Rochester, NY
Default

ya the only rim I had that fit was my "race wheels" 15x3.5 gregweld, I took the 26 DS2 off and put thous nexen radials on cuz I could get them in a few days and I needed somthing to street drive the car on. So still have my 26 DS2 I would like to get another rim for, there half the weight of these nexens.



Quick Reply: 2inch drop spindels



All times are GMT -5. The time now is 11:25 PM.