domestic disturbance

iTrader: (35)

Just wondering how hard you 6spd guys are leaving at on your 2 step!!!

Will be making a few passes on motor, and a few leaving on spray!

Also running a 4.56 gear in 9" with 28" tall tire!!!!

jmm98LS1

iTrader: (28)

Usually somewhere between 6000 and 7000 depending on track prep. Last time out I ended up at 6800.

domestic disturbance

iTrader: (35)

cool so 6k shouldnt be to much on a stock cam only motor?

223HAWK

iTrader: (11)

Cam only I would leave around 6800..cutting 1.5s full weight, On the jug 6200 is the highest Id have somewhat of luck..4:56s and Nitro is going to be fun if your running 1/4 mile

WheelsUp84z

iTrader: (14)

I'd imagine you'll b out of gear with 4.56's and spray. I'm turning 6400 rpms at the traps with 4.10s and 28's on motor (132-133mph) I usually leave at only about 5200. I can't imagine a 6800 launch holding traction with nitrous.

domestic disturbance

iTrader: (35)

Lol nah we run alot of 1/8 miles around here.... well I planned on hitting her around 6-6200 on motor and 5-5300 on the jug! 223hawk how much are you hanging the fronts and any suspension work?

Tally TransAm

iTrader: (17)

as high as the track will hold, usually 5000-5300

slowside

Isn't there a problem leaving while on spray because of the way two step works?

WheelsUp84z

iTrader: (14)

I have my 2 step and my nitrous activation hooked up to the same place (clutch switch) when the clutch is in, the 2 step activates and disables the nitrous.