Post pics of door bars.
#61
I just had the worst 10 point in existance fabricated and installed in my car. I wish I would have bought a pre bent setup and had it welded in. It would have saved me a ton of money in the long run after having horrible work done to my car. Take two is probably going to be a wolfe or MWCP. I like the MWCP door bars.
#62
I just had the worst 10 point in existance fabricated and installed in my car. I wish I would have bought a pre bent setup and had it welded in. It would have saved me a ton of money in the long run after having horrible work done to my car. Take two is probably going to be a wolfe or MWCP. I like the MWCP door bars.
#64
#65
I sit up pretty far, with the low slung bars I could rest my elbow on the armrest, except I keep my elbows kinda close in when driving, so I actually rest my elbow on the down bar.
I don't know, I'm 5'11" but with where the seat is in the pictures I can fully depress the clutch petal and have only a slight bend in my knee, I don't know how I could ever have the seat further back.
Beaflag you could do it the way Doc has Smoke done up at EFI Alchemy, the down bars in that car actually go through the armrests or something like that, it seems like it leaves the interior open. Don't know if you've ever stopped by there and looked at that car or not. Arm rests still looked functional, I guess the downside is if you wanted it to look good you'd have to do something about the section missing out of the bottom of the arm rest.
I don't know, I'm 5'11" but with where the seat is in the pictures I can fully depress the clutch petal and have only a slight bend in my knee, I don't know how I could ever have the seat further back.
Beaflag you could do it the way Doc has Smoke done up at EFI Alchemy, the down bars in that car actually go through the armrests or something like that, it seems like it leaves the interior open. Don't know if you've ever stopped by there and looked at that car or not. Arm rests still looked functional, I guess the downside is if you wanted it to look good you'd have to do something about the section missing out of the bottom of the arm rest.
#66
I just had the worst 10 point in existance fabricated and installed in my car. I wish I would have bought a pre bent setup and had it welded in. It would have saved me a ton of money in the long run after having horrible work done to my car. Take two is probably going to be a wolfe or MWCP. I like the MWCP door bars.
sorry, i dont mean to sound like a dick, but damn dude. get it together.
Last edited by kmracer; 12-25-2011 at 08:26 PM.
#69
Ah, cool thing to know! I always looked at it like why would they run it like this? My theory was room for the laptop? Makes sense now then, especially considering the rest of the car looks to be in show winning condition.
#70
If you look, youll see the door bar attachment next to the hood release, so its not in the way of your feet getting in and out. The upper end is also at the rear edge of the door. The door bar barely swings in.
Other interesting......notes. The main hoop is inside the headliner. Its not a head ach rack like most roll bars. The a pillar bars (its a complate cage) are behind the oem a pillar plastic, and the cross bar at the windshield is also inside the head liner.. The roof rails go thru the modded area of the t tops. It actually has MORE head room then the oem car.
I dont know why the pics wont post...I keep getting an internal server error from ls1 tech. These pics are posted on ls1 tech though....Its zombiess car. I built the cage
Other interesting......notes. The main hoop is inside the headliner. Its not a head ach rack like most roll bars. The a pillar bars (its a complate cage) are behind the oem a pillar plastic, and the cross bar at the windshield is also inside the head liner.. The roof rails go thru the modded area of the t tops. It actually has MORE head room then the oem car.
I dont know why the pics wont post...I keep getting an internal server error from ls1 tech. These pics are posted on ls1 tech though....Its zombiess car. I built the cage