Post pictures of lexan side windows installed
#1
Post pictures of lexan side windows installed
Front and rear looks easy to mount, but have no idea how i'm going to mount the side windows?
please post some Pictures.
Thank you
please post some Pictures.
Thank you
#2
I took a different route then most.
I have KOS carbon fiber doors that retain ALL OEM features.
So I sent an OEM door glass to Pro Glass and had them make bolt in lexan door windows that I have mounted to manual window regulators. Then I installed window latches in the top forward corners of the window which latch to the roll cage. This allows me to still have functioning windows.
FWIW.
Factory door windows weigh 14 lbs. each and the Pro Glass windows weigh 7 lbs. each.
I have KOS carbon fiber doors that retain ALL OEM features.
So I sent an OEM door glass to Pro Glass and had them make bolt in lexan door windows that I have mounted to manual window regulators. Then I installed window latches in the top forward corners of the window which latch to the roll cage. This allows me to still have functioning windows.
FWIW.
Factory door windows weigh 14 lbs. each and the Pro Glass windows weigh 7 lbs. each.
Last edited by Firehawk441; 10-22-2011 at 01:05 PM.
#5
mine is a stock doors but they just allowed us to use Lexan and its a race only car, and i don't have a problem mounting them without a manual window regulator.
thanks for sharing
thanks for sharing
Trending Topics
#10
TECH Resident
iTrader: (17)
Here are a few more not sure how much closer or more focused they are... are you looking for any part in particular?
Before the Carbon Fiber Doors were painted..
A side view from a bit away - These are Proglass windows, you can see they keep the same curve as the factory glass.
Before the Carbon Fiber Doors were painted..
A side view from a bit away - These are Proglass windows, you can see they keep the same curve as the factory glass.
#13
I'm located in Hamilton Twp. next to Trenton.