What should it run?
#1
What should it run?
Mods are in sig.
I will probably be running on a 295/35/18 nitto invo tire
Stock 10 bolt
Stock suspension
m6
Stock Gears
~3600lbs with me in the car
Delaware
EDIT: Makes around 475 to the wheel
I will probably be running on a 295/35/18 nitto invo tire
Stock 10 bolt
Stock suspension
m6
Stock Gears
~3600lbs with me in the car
Delaware
EDIT: Makes around 475 to the wheel
Last edited by z28SSilvest; 02-26-2014 at 03:48 PM.
#2
12.8 @ 110
With 26 inch drag tires and 4.10s probably lower 12s at 112-114 if you are good at power shifting.
EDIT: I thought it had a LS1, I see in the sig it has a LS3, I have no point of reference for that engine.
With 26 inch drag tires and 4.10s probably lower 12s at 112-114 if you are good at power shifting.
EDIT: I thought it had a LS1, I see in the sig it has a LS3, I have no point of reference for that engine.
Last edited by guppymech; 02-26-2014 at 03:38 PM.
#3
ls7 clutch is goin to kill it. My moto is run 11's with bolt-ons BEFORE you cam it. You will learn better that way. Of course you already cammed it......so guppy probably has it right.
FYI...last bolt-on car I helped with went 11.9 @116.xx.......on exhaust manifolds.
FYI...last bolt-on car I helped with went 11.9 @116.xx.......on exhaust manifolds.
#4
I would be happy with mid-high 12s with a street tire
#5
My personal opinion is that with that setup even with street tires you should be in the 11's
with a sticky tire you should be high high high 10's at the very least an extreme low 11 assuming you have it setup right and are a good driver and racing in a DA of around 2000 or less...
#7
Hopefully the 10 bolt doesn't go
Trending Topics
#8
[QUOTE=z28SSilvest;18048973]Well the track opens this Friday, however it's supposed to be 27 degrees. But I will keep this thread updated with run times!
Hopefully the 10 bolt doesn't go [/QUOTYou'll probably be spinning so bad
Hopefully the rear will be fine since you'll probably be spinning so bad lol
Hopefully the 10 bolt doesn't go [/QUOTYou'll probably be spinning so bad
Hopefully the rear will be fine since you'll probably be spinning so bad lol
#9
[QUOTE=HCI2000SS;18049010]
LOL. Maybe I should just wait until the weather gets warmer so I don't run a 14 in the freezing cold and get myself down
Well the track opens this Friday, however it's supposed to be 27 degrees. But I will keep this thread updated with run times!
Hopefully the 10 bolt doesn't go [/QUOTYou'll probably be spinning so bad
Hopefully the rear will be fine since you'll probably be spinning so bad lol
Hopefully the 10 bolt doesn't go [/QUOTYou'll probably be spinning so bad
Hopefully the rear will be fine since you'll probably be spinning so bad lol
LOL. Maybe I should just wait until the weather gets warmer so I don't run a 14 in the freezing cold and get myself down
#11
#20
Yeah. It was my first time running so I'm still getting down the whole launch thing. Slicks with a built rear should definitely help out a lot. I was babying it off the line last night 2.3xx 60 foots all night