ARE H/C New Best
Thread Starter
TECH Enthusiast
Joined: Oct 2002
Posts: 593
Likes: 0
From: Chicago
ARE H/C 10.71 @ 127.81 New Best Not by much but it's the 1st time out with new Jessels 1.8's and my 90mm FAST & TPIS TB. My anti roll bar broke so the car was rolling over and my 60's could have been better but the mph was killer.
Best 60 of the day was 1.43
best et 10.71
best mph 127.8
Thats right with an A-4 and a 12 bolt at 3320 lbs.
DA was about 500 ft
Thanks to Nick and the guys at ARE.
Best 60 of the day was 1.43
best et 10.71
best mph 127.8
Thats right with an A-4 and a 12 bolt at 3320 lbs.DA was about 500 ft
Thanks to Nick and the guys at ARE.
Last edited by Silvr98z28; May 17, 2004 at 11:19 AM.
Launching!
Joined: Dec 2001
Posts: 231
Likes: 0
From: Collin County
Nice !!! 
How much did you gain at the wheels with the 90mm set-up ?
I have been having traction problems as of late. I am starting to think that I might have been at that point where the extra power I added, has now caused me to look at my set-up again. I think slicks and some shocks are now needed.
Are you on slicks ?
How much did you gain at the wheels with the 90mm set-up ?
I have been having traction problems as of late. I am starting to think that I might have been at that point where the extra power I added, has now caused me to look at my set-up again. I think slicks and some shocks are now needed.
Are you on slicks ?
Thread Starter
TECH Enthusiast
Joined: Oct 2002
Posts: 593
Likes: 0
From: Chicago
Roger, I picked up 20-25 through the mid and 10 peak but that was also with the Jessel 1.8's which gave me some more lift. And yes I'm on slicks but I run the same 60's on QTP's. I'll pull a 1.39 I'm sure once I get this Anti roll bar welded back together.
Sean, nice to meet as well, good luck with your combo.
New with the suspension/ chassis is Jay Billingsley's new torque arm and lca's and the new stock replacement coil overs for the rear by Autofab which worked pretty well considering the broken Anti-roll bar.
Sean, nice to meet as well, good luck with your combo.
New with the suspension/ chassis is Jay Billingsley's new torque arm and lca's and the new stock replacement coil overs for the rear by Autofab which worked pretty well considering the broken Anti-roll bar.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
You have some awsome 60's nice MPH too. What rpm do you go thru the traps w/4.10s. Mike Norris just tunned my car w/the 90 Fast it picked up 18hp but 0tq, I guess my 41/2 year old ARE heads are`nt as good as Nicks newer ones. Great #s
Thread Starter
TECH Enthusiast
Joined: Oct 2002
Posts: 593
Likes: 0
From: Chicago
Originally Posted by Caveman
You have some awsome 60's nice MPH too. What rpm do you go thru the traps w/4.10s. Mike Norris just tunned my car w/the 90 Fast it picked up 18hp but 0tq, I guess my 41/2 year old ARE heads are`nt as good as Nicks newer ones. Great #s
