Drag Racing Tech
Sponsored by:
Sponsored by:

60' is getting worse :( killin my ET

Thread Tools
 
Search this Thread
 
Old 06-09-2014 | 01:54 AM
  #61  
ahhwataday's Avatar
Thread Starter
TECH Enthusiast
iTrader: (7)
 
Joined: Jun 2006
Posts: 508
Likes: 0
From: Richmond, VA
Default

TIME 60' 1/8 MPH 1/4 MPH TEMP
7:04 2.07 8.65 84.54 13.30 105.29 75
7:43 2.18 8.88 83.85 13.56 104.82 75
8:52 2.17 8.96 83.04 13.66 104.43 71
9:53 2.10 8.75 84.33 13.41 105.24 68

Humidity, DA and BP were still unknown.....I dont have a smart phone. I staged a little deeper on the last 3 passes.... I also red lighted twice lol. next time Ill stage as I usually do. I think Im better off just trying to get used to that
Old 06-26-2014 | 12:23 AM
  #62  
ahhwataday's Avatar
Thread Starter
TECH Enthusiast
iTrader: (7)
 
Joined: Jun 2006
Posts: 508
Likes: 0
From: Richmond, VA
Default

I looked over my time slips. My average (mean) time per session is not far off from the rest. Im guessing the DA and BP are cuasing my mean to be off by a few tenths. I just expected faster times after each modification. We shall see in the winter. I dont really think the trans is slipping, I just wanna build it with a stall lol
Old 06-29-2014 | 10:28 PM
  #63  
Drj8787's Avatar
TECH Apprentice
 
Joined: May 2010
Posts: 361
Likes: 0
Default

Flash it off the line from idel I ran a 12.92@106.69 1.9 60' like this on street tires "mt street comps not et streets" stock motor and converter with exhaust n lid k&n try that see if it helps. Try doing a bigger burn out n then less of one see if our tires a partial to one or the other. Seat time is a big part of it too. U can't expect the best out of the car if u haven't spent the time in the seat to figure out what it likes. 13.16 isn't bad tho id say some more seat time at the track n u will break into the high 12's pretty easy good luck



Quick Reply: 60' is getting worse :( killin my ET



All times are GMT -5. The time now is 05:11 PM.