ryany

iTrader: (15)

I installed a supervictor intake and a accufab 4150 on my car where are you guys mounting the iat sensor at? Thanks for any help Pictures would be great.

blue99fbody

iTrader: (5)

just zip tied it near the tb opening/cowl where ever u can

ryany

iTrader: (15)

Ok thanks for the help

black and pink z28

iTrader: (7)

My bubbly put his in the front bumper it work out go there had to make the wires longer

RENE'S RAGE

iTrader: (96)

Good thread, I'd like to know myself.
I have my mounted with a L-bracket on the last bolt on the tb by the drivers cowl.
Always wondered about mounting it in the front bumper.

ryany

iTrader: (15)

Can you show a few pics of your setup RENE'S RAGE?

RENE'S RAGE

iTrader: (96)

Sure, I'll get the wife to take some and post em, I'm old school, I can barely type.

RobsZ28

iTrader: (3)

I put mine in the front bumper by the passenger headlight

RENE'S RAGE

iTrader: (96)

Anyone have any proof which location is better?

subhumanzz

iTrader: (46)

Extend the harness and put it in line with some fresh air. Mine is mounted outside the driver side frame rail with an adel clamp behind the fog light hole.

RENE'S RAGE

iTrader: (96)

Wouldn't putting it in the front, to get fresh air, trick the pcm into thinking it's getting cooler air than what's really going into the intake. What cause would that have on the tune? I'm sure the air at the tb is warmer than the air at the front of the car.

Zmg00camaross

iTrader: (11)

I guess there is no way to delete it?

SSPerformance

iTrader: (76)

I have always put mine as close as possible to the tb so its geting a true reading of the air its geting and no you do not want to delete it

HSESWS6

iTrader: (3)

Thats what I did with mine, as close to the opening to get the temp of the air going into the TB

Firehawk441

iTrader: (41)

I just used a bracket bolted to the T/B mounting stud.

ryany

iTrader: (15)

Here a couple of mine thanks Rene's Rage

T6Rocket

Would be nice if you could get in the actual air stream.

Al