When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hello I just purchased some tsp 2" headers with 3.5" collectors. I wanted to see some 3.5" y pipes or full exhaust setups. Car is primarily used for track use.
I run Kook's 2" headers w/3.5" collectors. I fabricated and put together an exhaust system that you might like as well. I will post pics when I get home.
I run Kook's 2" headers w/3.5" collectors. I fabricated and put together an exhaust system that you might like as well. I will post pics when I get home.
Mine is not a Y pipe but my tranny is out now and these are laying on the floor so here you go. Under $100 total investment, 2 4' sticks 3.5" pipe and 2 3.5" cherrybomb extreme mufflers. Only have 3 runs on car so no comparison between through mufflers and open header.
Well I just sourced the stuff to custom make a 3.5" to 4" Y pipe, bill was $130 from Summit and $75 for a merge on ebay. 3.5" merges are hard to come by. I ended up getting a Howe merge thats a 5" bellmouth exit and Im just gonna cut it back to where its 4". At summit I bought 2 long u-bends, two header slip connectors, two lap clamps, and one 4' piece of straight pipe. Should be making it within the week.
The simplicity of running dumps is always enticing. I just cant stand the noise in the car. Even just putting a 90 on the end and pointing it out under the rocker make a huge difference in cab noise.
I have built a ton of custom exhaust over the years. Every single time I buy mandrel pre bends from summit. I select whatever brand bend is cheapest on their site. Lots of times its summit brand (obviously made by someone else). The merge I select was Howe Racing, a company ive never heard of. It actually all showed up today. I will be posting pics soon.
I have built a ton of custom exhaust over the years. Every single time I buy mandrel pre bends from summit. I select whatever brand bend is cheapest on their site. Lots of times its summit brand (obviously made by someone else). The merge I select was Howe Racing, a company ive never heard of. It actually all showed up today. I will be posting pics soon.
Yep, the cheapest mandrel pipe is the pipe for me.
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Slideshow: The controversial Ferrari F6 swaps its original flat-12 for a Corvette Z06-derived LT4 V8 and sends power to four rear wheels through a custom-built drivetrain.
7 Most Reliable High-Performance Engines GM Has Ever Built
Slideshow:These GM engines didn't just make huge power, they survived abuse, boost, track days, and six-digit mileage with a reputation for refusing to quit.
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Slideshow: From wobbling harmonic balancers to failed EBCMs, these are the issues that define long-term C5 ownership and what repairs typically involve.
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Slideshow: A modern Camaro transformed into a retro icon, this limited-run "Bandit" build blends nostalgia with brute force in a way few revivals manage.
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Slideshow: Cadillac didn't just crash the high-performance luxury vehicle party, it showed up loud, supercharged, and occasionally a little unhinged...
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Slideshow: A one-off sports car that looks like a vintage Italian exotic-but hides a C6 Corvette underneath-just sold for the price of a new mid-engine Corvette.
